ePED® escape door terminal in switch design for access control system, 24 V DC, flush-mounted for time delay and illuminated pictogram

Gira E2 – aluminium finish

  • ArtNo: 1386Z1LB2--3500

Product description

For use with time delay, with 4-wire bus cabling in Hi-O technology.

With emergency open module for the control and monitoring of electrical locking elements for escape routes.

The time delay is tested according to the requirements of DIN EN 13637:2015 (electrically controlled exit systems for use on escape routes) as per EN 61508 Safety Integrity Level 2 (SIL2).

Time delay applications are subject to local Building Regulations. Additional permissions may be required.

Prepared for external AC system.

With empty position for integration of e.g. a RFID reader of an external AC system.

Connection to door terminal via: SYSCON-5 connection cable

For mounting in DIN switch boxes for light switch systems with manufacturer-specific covers and frames.

Consists of: illuminated pictogram; display release delay; emergency open module; empty position for accepting a RFID reader

Technical data
Current consumption 24 V DC225 mA
Control functionYes, Hi-O technology
Operating and display functionYes
Connection4-wire bus
Time delayNo
Illuminated pictogramYes
Display of down counterYes
Emergency buttonYes, latching
Control elementVia external AC system
Initial configurationWith ePED® service interface and software for MS Windows
Required power supply24 V (±15 %) DC SELV
Operating temperature range-10 °C – +55 °C
Area of applicationFor indoor use
Class of protectionIP30 (wenn vollständig montiert)
InstallationIn DIN switch boxes >= 62.5 mm deep
Dimension4-gang switch combination
Sabotage switchYes
Inputs2
Outputs1 x 30 V / 1 A switchover contact
Amount of bus addresses3
Certified in compliance withEltVTR; DIN EN 13637:2015
ControlYes, Hi-O technology
Function indicatorYes, integrated