High security dead bolt Technilock® L4 Handle version
Handle version - Backset 35 mm, Fail-locked with control latch, Follower 9 mm, Euro Profile cylinder
Product description
Electromechanical drop bolt for use in high security areas. The drop bolt is also equipped with a follower for unlocking via a door handle fitting.
Overview of Advantages
- Reliable impact resistance
- Bolt side load breaking force of up to 20,000N
- 80N preload capacity for reliable unlocking
- Status monitoring via programmable monitoring contacts, additional relay circuit board provides potential-free monitoring contact
- Programmable unlocking time
- Sequence control system for locking with mechanical and electrical query of the door status
- Integrated error log and undervoltage indicator make fault rectification easier. Malfunctions can be traced on site and quickly verified for repair purposes, with rapid error analysis, high available, short downtimes
- Integrated microprocessor control unit: no additional external control unit required
- Vertical installation in door leaf possible
- Control board with protective coating, enabling use in protected outdoor installation
- Compatible to the former L3 series handle version – thus simple exchange possible
Scope of delivery
- 1x Technilock®
Note
- Striking plate is not included in the scope of delivery.
Input operating voltage | 24 V DC, stabilised |
Rated operating voltage tolerance range | -10 % / +15 % |
Rated current consumption | Impulse current: 4 A (0,5 sec); hold current: 0,25 A |
Max. contact load capacity | 25 mA / 24V DC |
Current consumption for operating voltage 24 V DC | 0.25 A |
Current consumption for switch-on current 24 V DC | 4 mA |
Bolt side load breaking force | 20 N |
Max. bolt side load | 50 N |
Bolt throw | 20 mm |
Case depth | Backset + 17,5 mm |
Operating temperature range | -20 °C to +60 °C |
Distance between faceplate and striking plate | Min. 2 mm to max. 5,5 mm |
Version | Fail-locked with control latch |
Backset | 35 mm |
Follower | 9 mm |
Version | Fail-locked |
Dimension housing | 355 x 24 x 49,5 mm (LxWxD) |
Faceplate dimensions | 425 x 32 x 3 mm (LxWxD) |
| Order number | Product |
---|---|---|
844L4SBL1----01 | Strike plate, model 844L4SBL Standard DIN Universal | |
844L4SBL2----04 | Strike plate, model 844L4SBL Standard, flanged 28 mm, DIN left | |
844L4SBL2----05 | Strike plate, model 844L4SBL Standard, flanged 28 mm, DIN right | |
844L4SBL3----01 | Strike plate, model 844L4SBL Adjustable, DIN Universal | |
844L4SBL4----04 | Strike plate, model 844L4SBL Adjustable, flanged 28 mm, DIN left | |
844L4SBL4----05 | Strike plate, model 844L4SBL Adjustable, LAP 28 mm, DIN right | |
844L4SBLM----01 | Replacement Striking Plates L4-M4 Standard, M4-compatible dimensions, DIN universal | |
844L4SBLM3---01 | Replacement Striking Plates L4-M4 Adjustable, M4-compatible dimensions, DIN universal | |
844L4ZBD1----00 | Spacer plates, model 844L4ZBD1 Spacer plates | |
844L4RGK30---01 | Bolt case model 844L4RGK 30 mm backset, only for Technilock® L4 variant without follower | |
844L4RGK35---01 | Bolt case model 844L4RGK 35 mm backset, only for Technilock® L4 variant without follower | |
844L4RGK40---01 | Bolt case model 844L4RGK 40 mm backset, only for Technilock® L4 variant without follower | |
844L4RGK60---01 | Bolt case model 844L4RGK 60 mm backset, only for Technilock® L4 variant without follower | |
844L4SBK-----01 | Strike plate box, model 844L4SBK Strike plate box, model 844L4SBK | |
844SX63-------- | Security Escutcheon Model 844SX63 With core drawback protector; for Eurocylinder; nickel-plated mat | |
844L4ZBP1----00 | Circuit board potential-free contact; compatible with M4; only for Technilock® L4 variant without follower |