Wiegand Interface (Advanced Wiegand) Communication Hub AH20 Advanced Gen5
Wiegand Interface (Advanced Wiegand) Communication Hub
For indoor use
Product description
For connection to EAC system via Wiegand interface
Provides radio communication to the Aperio® door devices
Integrated antenna with the option to mount an external antenna
Encrypted radio communication
For standard electrical installation boxes
LED for status visualisation
Built in tamper switch. Detection of removal from bracket
Additional relay outputs: These relay outputs can be connected the to the controller. The messages are fixed as follows: DPS (Door Position), RX (Request to exit), Battery Alarm Output, Tamper Alarm Output, Lock Jammed
Scope of delivery
- 1 hub with installation instructions
- Fixing screws
- Wall bracket
![]() | Approvals: | CE, ETL, FCC, IC, C-Tick |
Safety and Emissions: | IEC 62368-1:2014 EN 62368-1:2014 + A11:2017 UL/CSA 62368-1:2014 EN 301 489-1 V2.1.1 EN 301 489-17 V3.2.0 EN 300 328 V2.2.2 EN 50130-4:2011 + A1:2014 EN 62311 FCC 47CFR Part 15 subpart B and subpart C ISED RSS-247 and ICES-003 AS/NZS 4268 | |
![]() | Dimension: | 82 x 82 x 37 mm (H x W x D) |
![]() | Required power supply: | 8 - 24V,DC 0.8W |
Relay: | 30VDC/1A resistive load (Advanced Version only) | |
![]() | Radio standard: | IEEE 802.15.4 (2.4 GHz) - 16 channels (11-26) |
Encryption (radio communication): | AES 128 bits | |
Receiver sensitivity: | - 100dBm | |
Wireless operating range: | Typical range of 25m depending on building enviroments | |
![]() | Internal antenna: | 2 cross polarized dipoles |
External antenna: | One reverse polarity SMA external antenna connector. AH20/30 is certified to be used with ASSA ABLOY external antenna AH-ANTENNA-1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3.6 dBi. | |
![]() | Class of protection: | IP 20 |
Operating temperature range: | 5°C to 35°C | |
Relative humidity: | < 95% (non-condensing) | |
![]() | Status: | LED (red/green/orange) |