RS485 Communication Hub AH30 1-to-16 Standard
RS485 Communication Hub
For indoor use
Overview of Advantages
- Connection to the EAC system via RS485 BUS (addressable). Enables connection of up to 16 Aperio® products with a hub.
- Wireless range up to 25 m
- Integrated antenna with the option to mount an external antenna
- Encrypted radio communication
- Mounting on wall bracket (included)
- LED for status visualisation
- Built in tamper switch. Detection of removal from bracket
- Firmware upgrade via UHF radio or IP network
- Event Log in the hub
Product description
The Aperio AH30 Gen5 1-to-16 hub is used for communication between the Aperio wireless components and the access control system. The communication takes place encrypted and in real-time.
With the RS485 hub, a total of 16 online components can be activated, meaning that 16 doors can be managed and controlled.
The mounting takes place on either all conventional flush-mounted casings or using a surface-mounted casing (included).
Via an LED status display, the user receives a quick overview of the individual states of the hub, the communication and the activation process.
The range of the transmission path to the Aperio lock devices is max. 25 m and can be specially aligned via external antennas.
Scope of delivery
- 1 hub with installation instructions
- Wall bracket
- Fixing screws to mount hub to wall housing.
 | Approvals: | CE, ETL, FCC, IC, C-Tick |
| Safety and Emissions: | IEC 62368-1:2014 EN 62368-1:2014 + A11:2017 UL/CSA 62368-1:2014 EN 301 489-1 V2.1.1 EN 301 489-17 V3.2.0 EN 300 328 V2.2.2 EN 50130-4:2011 + A1:2014 EN 62311 FCC 47CFR Part 15 subpart B and subpart C ISED RSS-247 and ICES-003 AS/NZS 4268 | |
 | Dimension: | 82 x 82 x 37 mm (H x W x D) |
 | Required power supply: | 8 - 24V,DC 0.8W |
 | Radio standard: | IEEE 802.15.4 (2.4 GHz) - 16 channels (11-26) |
| Encryption (radio communication): | AES 128 bits | |
| Wireless operating range: | Typical range of 25m depending on building enviroments | |
| Receiver sensitivity: | - 100dBm | |
 | Internal antenna: | 2 cross polarized dipoles |
| External antenna: | One reverse polarity SMA external antenna connector. AH20/30 is certified to be used with ASSA ABLOY external antenna AH-ANTENNA-1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3.6 dBi. | |
 | Class of protection: | IP 20 |
| Operating temperature range: | 5°C to 35°C | |
| Relative humidity: | < 95% (non-condensing) | |
 | Status: | LED (red/green/orange) |