Wiegand Interface Communication Hub Aperio® AH20 Standard Gen5 1 to 1 Communication Hub

Wiegand Interface Communication Hub

For indoor use

Product description

For connection to EAC system via Wiegand interface

Provides radio communication to the Aperio® door devices

Built in tamper switch. Detection of removal from bracket

Integrated antenna with the option to mount an external antenna

Encrypted radio communication

For standard electrical installation boxes

LED for status visualisation

Event Log in the hub

Scope of delivery

  • 1 hub with installation instructions
  • Fixing screws to mount hub to wall housing.
  • Wall bracket
Technical data - Wiegand Interface Communication Hub Aperio® AH20 Standard Gen5 1 to 1 Communication Hub
Approvals:CE, ETL, FCC, IC, C-Tick
Safety and Emissions:IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
UL/CSA 62368-1:2014
EN 301 489-1 V2.1.1
EN 301 489-17 V3.2.0
EN 300 328 V2.2.2
EN 50130-4:2011 + A1:2014
EN 62311
FCC 47CFR Part 15 subpart B and subpart C
ISED RSS-247 and ICES-003
AS/NZS 4268
Dimension:82 x 82 x 37 mm (H x W x D)
Required power supply:8 - 24V,DC 0.8W
Radio standard:IEEE 802.15.4 (2.4 GHz) - 16 channels (11-26)
Encryption (radio communication):AES 128 bits
Receiver sensitivity:- 100dBm
Wireless operating range:Typical range of 25m depending on building enviroments
Internal antenna:2 cross polarized dipoles
External antenna:One reverse polarity SMA external antenna connector. AH20/30 is certified to be used with ASSA ABLOY external antenna AH-ANTENNA-1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3.6 dBi.
Class of protection:IP 20
Operating temperature range:5°C to 35°C
Relative humidity:< 95% (non-condensing)
Status:LED (red/green/orange)