Flange reed contact
Normally open contact; 2-wire; with connecting cable, length 6 m; VDS class A; with flange
Product description
Reed contacts are fused into a glass capillary tube to make them dustproof and waterproof. Reed contacts are contactless-activated by a permanent magnet. The reed contact is surface or mortise-fitted to the door frame, for instance, and the magnet to the door. When the door is closed, the magnet acts on the contact (contact closed). If the door is opened beyond the respective sensing distance, the contact is interrupted (contact open).
In the case of steel profiles (a magnetic material), only use block reed contact, model 10365 and assembly base 10366 for surface fitting. The assembly base and supports make it easier to fit as planned, or serve as a fitting tool for the magnet contacts
Scope of delivery
- Flange reed contact
Note
- Normal open
| Input operating voltage | max. 30 VDC |
| Max. contact load capacity | 200 V DC |
| Contact type | Change-over contact |
| Max. switching interval | 15 mm |
| Dimension | Ø 8 x 31 mm |
| Class of protection | IP 67 |
| Connection cable length | 6 m |
| Max. switching current | max. 0.2 A; observe the max. contact load capacity! |
| Number of wires | 2 wire |
| Colour | Grey white |
| Material housing | Plastic |
| Operating temperature range | 0 °C to +40 °C |
| Contact resistance | 0.15 Ohm |
| VdS class | Class A |
| VdS-approval | G104729 |
| Height | 2 mm |
| Length flange | 26 mm |
| Width flange | 12 mm |
| Diameter | 9,3 mm |
| Case depth | 34 mm |
| Mounting | Flange reed contact |