Profile-knob cylinder eCLIQ N534,KNF=2
Small tapered knob with 28 mm diameter -without key-
Product description
- Power is supplied exclusively via the key (no battery in the cylinder)
- Available as rotary secured or electronical version (V=)
- Brass cylinder housing components
- Standard finish, satin nickel-plated (OF=MV)
- Standard knob colour satin nickel-plated (KNF=2MV)
- Basic cylinder length 61 mm (C) - A/B (L=30/30) - other installation lengths available - flexible modular system
- Optional, differing basic cylinder length of 56 mm (C) - A/B (L=28/28)
- Standard locking cam position (SST=30°); differing locking bit position available, optionally available with SST=FLEX
- Optionally with magnetic locking cam reset function (VAR=FS)
- Optionally available with double locking cam (VAR=K901310-X-BIFFAR)
- Optionally available with anti drilling protection class 2 (AB=2)
- Cam made of break-proof, corrosion-resistant stainless steel
- Maintenance-free for up to 200,000 cycles
- Splash-proof IP54
- Dust and rain cover available (SUR=3) IP55
- Optionally VdS★★★ (SZ=VDS-BZ+, AB=3)
- Optionally DIN EN 15684 with anti drilling protection class 2 (SZ=DIN-D, AB=2)
- Optionally available for use in potentially-explosive atmospheres in Zone 1 (ATEX=II 2G Ex ib IIC T4 Gb)
- Optionally available with classroom function: With this anti-amok function the knob is disengaged as the key is entering the cylinder on the opposite side (VAR=1901509+3+ENTKUPPL.)
Scope of delivery
- 1 profile-knob cylinder
- 1 cylinder fixing screw M5 x 85 mm
Ordering Information
- The knob is always on the inside of the cylinder (B)
Article number | KNF= | OF= | L= | V= |
---|---|---|---|---|
N534,KNF=2 | 2MV | MV/MV | 30/30 | D |
2MV | MV/MV | 30/30 | E |
Drilling protection
AB= | Description | Area of application | Info |
---|---|---|---|
2 | Security category 2 drilling protection | For profile knob, half and special cylinders | per cylinder |
Test certificate
SZ= | AB= | Description | Area of application | Info |
---|---|---|---|---|
DIN-D | 2 | DIN-tested profile cylinder | For profile half and knob cylinders | per cylinder |
Special finish
OF= | Area of application | Info |
---|---|---|
MC | For profile and locking lever cylinders | Matt, chrome plated |
MG | For profile and locking lever cylinders | Brass, satin brushed |
MP | For profile and locking lever cylinders | Polished brass |
PC | For profile and locking lever cylinders | Polished chrome-plated |
BR | For profile cylinders | Brown glossy |
MS | For profile cylinders | Matt black |
Dust and rain protection
SUR= | Area of application | Info |
---|---|---|
3 | For profile knob and double cylinder, double cylinder one side blind and half cylinder | per cylinder |
Cam position and free wheeling function
SST= | Description |
---|---|
90-270 | 90-270 degrees |
270-90 | 270-90 degrees |
270-0 | 270-0 degrees |
0-90 | 0-90 degrees |
180-90 | 180-90 degrees |
270-180 | 270-180 degrees |
135-180 | 135-180 degrees |
135-225 | 135-225 degrees |
90-180 | 90-180 degrees |
180-270 | 180-270 degrees |
270-30 | 270-30 degrees |
330-90 | 330-90 degrees |
Cogwheel version
SST= | Area of application | Description |
---|---|---|
K901179 | Mul-T-Lock type | Diameter 24 mm / Module 2 / 10 teeth |
K901180 | VIRO/IKON .138 type | Diameter 30 mm / Module 1,5 / 18 teeth |
K901188 | Italian type | Diameter 27 mm / Module 1,5 / 16 teeth |
K901293 | Laperche type | Diameter 24 mm / Module 1,5 / 14 teeth |
Special identification marking
Description | Info |
---|---|
Special designation of your choice for the front of profile cylinders, 6 characters maximum (SBZ=) | per cylinder |
Explosion protection
ATEX= | Description | Info |
---|---|---|
II 2G Ex ib IIC T4 Gb | Locking cylinders for Zone 1 hazardous areas | per cylinder |
Version
V2= | AUS3= | Description | Info |
---|---|---|---|
ONLINE | Cylinder with function "Online Open", frontal marking with symbol "@" | per cylinder | |
SEQUENCE | Cylinder with function "two-man rule", frontal marking with symbol "&" | per cylinder | |
OHNE AUDIT | Cylinder without events list, frontal marking with symbol "§" | per cylinder |