mFlipLock check, panic multi-point locking system 24574PE-SV-TF.6

Overview of Advantages

• Monitoring and feedback of the lock status
• 3 flip latches with sound insulation
• Mechanical automatic locking
• Mechanical applyable daytime release function
• Easy to open under pre-load
• With latch-bolt function
• No
• Certification according to EN 1125
• Certification according to EN 1634-1 to 3
• Intrusion resistance up to Class RC3 achievable in suitable door systems

Product description

• These multi-point locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). These locks are also available equipped with a mechanically activated daytime release function (key rotation in locking direction to the stop in open state). This means that the doors can be passed through from both sides, because the 3 flip latches are unlocked and act like a roller keep. If daytime release function is switched off, (key rotation in opening direction in open state), the lock locks automatically when the door is closed (automatic locking). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. The handle pulls the 3 long bolts back and also unlocks the 3 fliplatches (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key.

Area of Application

• For access control and monitoring in building management
• Security doors, escape route and fire doors in commercial and public buildings
• Internal building area in combination with access components

Note

• Suitable for freewheeling cylinders
• Backset 45/50/65 mm only on request.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Only for system partners with a training certificate
• External bolt switch contacts not permitted