mFlipLock panic security multi-point locking system 24446PBe

Overview of Advantages

• 3 flip latches with sound insulation
• Easy to open under pre-load
• Version with round cylinder or profile cylinder
• Backset: 30 - 80mm
• square face plate in 16, 18, 20 or 24 mm width, U-shaped face plate in 22 or 24 mm width
• No
• Certification according to EN 1634-1 to 3
• Intrusion resistance up to Class RC3 achievable in suitable door systems

Product description

• With these multi-point locking systems, a door handle is mounted on both the inside and outside of the door. In unlocked state, the door can be opened from both sides. In locked state, the door can not be opened from the outside, but always from the inside via the door handle (panic function inwards opening). The 3 long bolts are retracted and the 3 flip latches are unlocked. The spindle (follower) is split with panic function B. This panic function is suitable for doors that also have to be opened periodically from the outside (daytime operation). Daytime operation can be activated via the cylinder with a key rotation to the stop in the direction of opening, then the door handle on the outside is engaged.

Area of Application

• New construction and renovation
• Internal building areas
• In security doors, escape route and fire doors.

Note

• Suitable for freewheeling cylinders
• On the frame side, only use bolt switch contact MSL 1886.
• Backset 45/50/65 mm only on request.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Use special profile half spindle MSL 5968