mFlipLock e-drive, handle-operated, 26546PBa-SV-ZF.3

Overview of Advantages

• Electronically engaging door handle
• Attached motor unit with integrated motor control for the basic open/close function With switched output if the lock has undergone motorised release.
• Display of the open position and feedback to electric door drives
• Opening signal (GND) e.g. via fingerprint, button, switching timer, etc.
• Electrical interface RS 485, e.g. for direct communication via biometrics scanner and error log
• Tamper protection opening impulse now only via BUS
• Flip latches enable easy motorised unlocking, even with door warpage.
• Motorised opening in 1.5 seconds
• Low power consumption: 350 mA at 24 V DC
• Deadbolt stroke, single rotation, 20mm each
• Mechanical automatic locking system
• Version with round cylinder or profile cylinder
• Backset: 30 - 80mm
• Certification according to EN 179
• No
• Certification according to EN 1125
• Approved in accordance with EN 1634-1 to 3 only with AWS
• Approved in accordance with EN 12209 Class 7
• Approved in accordance with EN 18251-2 Class 5
• Intrusion resistance up to Class RC3 achievable in suitable door systems

Product description

• With split handle follower for motorised engagement and disengagement of the outside handle, DIP switch on the lock enables switching to fail-locked or fail-unlocked, fail-unlocked only in conjunction with evaluation control (AWS), independent automatic locking of the additional bolt, panic function B-SV-ZF, for double-leaf doors, outwards opening, 3 tilt latch bolts and 3 bolts, without latch-bolt function, PZ-92, flat face plate 1950 x 18e x 3mm INOX mb, tilt latch bolt, bolt and follower made from stainless steel, rest galvanised.

Area of Application

• Internal building areas, office rooms, IT server rooms, industrial areas and public buildings
• Security doors, escape route and fire doors in commercial and public buildings

Note

• Suitable for freewheeling cylinders
• External bolt switch contacts not permitted
• Backset 40/45/50/65 mm only on request
• Round rosettes (cross-screwed) only from backset 45 mm.
• In combination with the passive leaf locking system 24413 or 24473. Connecting cable and striking plates must be ordered separately.
• Use special profile half spindle MSL 5968