mFlipLock panic security multi-point locking systems 24546PBa-SV-ZF

Overview of Advantages

• 3 flip latches with sound insulation
• Mechanical automatic locking
• Easy to open under pre-load
• Version with round cylinder or profile cylinder
• Backset: 30 - 80mm
• Round face plate in 18mm / 20mm width or square face plate 24mm
• Certification according to EN 1125
• Certification according to EN 1634-1 to 3
• Intrusion resistance up to Class RC3 achievable in suitable door systems

Product description

• With these multi-point locking systems, a door handle, panic door fitting or a pushbar is mounted on the inside of the door. A door handle is also mounted on the outside of the door. In unlocked state, the door can be opened from both sides. In locked state, the door can not be opened from the outside, but can always be opened from the inside via the door handle, panic door fitting or pushbar (panic function). The 3 long bolts are retracted and the 3 flip latches are released at the same time. The lock locks automatically when the door closes (automatic locking). The spindle (follower) is split with panic function B. This panic function is suitable for doors that also have to be opened from the outside at specific times (daytime operation). Daytime operation can be activated via the cylinder, with a key turned in the direction of opening to the stop - the door handle is then engaged on the outside of the door. Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the panic fitting or pushbar. Automatic locking when the door is closed via switch lock triggering.

Area of Application

• double-leaf full panic doors
• Security doors, escape route and fire doors in the industrial field and public buildings, including in combination with electronic fittings like an actuating bar.

Note

• Suitable for freewheeling cylinders
• In combination with the passive leaf locking system 24413 or 24473. Panic security multi-point locking system have to be ordered seperately.
• Backset 45/50/65 mm only on request.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Use special profile half spindle MSL 5968
• External bolt switch contacts not permitted