Motorised power cam bolt

Product description

The motorised power cam bolt 842-SA1 can be used in fail-locked mode (locked when de-energised, no unlocking option in the event of power failure) or in fail-unlocked mode (unlocked when de-energised).

During the locking process, the bolt is swivelled into the locking position with high force by an electric motor. The bolt swivels into the locking counterpart with V-shaped cut-out. This has the advantage that the bolt can also be swung out if the locking counterpart and swing bolt are not positioned precisely in relation to each other.

Overview of Advantages

• Break-in resistance of 10,000 N
• Unlocking pre-load up to 1000 N
• Suitable for revolving and double action doors
• Suitable for horizontal and vertical installation
• Permanent function: 500,000 cycles (tested at 120N preload during unlocking and 50N door closing force during locking)
• The powerful drive can overcome door sealing forces of up to 200 N when locking (the door leaf is drawn closed)
• The V-shaped cutout in the locking counterpart tolerates a lateral offset of +/-6 mm
• Simple switchover from fail-unlocked to fail-locked via a DIP switch
• Unlocking time 1 second, even under pre-load
• Locking time 3 seconds
• Multi-voltage 11.4 to 26 V DC
• Monitoring contact and armature contact integrated
• Protection category IP53
• Operating temperature range -10 to +55 degrees Celsius
• Two independent LEDs are located in the strike plate. For example, the locked state is displayed and confirms if the product is functioning correctly. Errors are displayed, e.g. an LED lights up yellow in the event of undervoltage and orange in the event of overvoltage.

Scope of delivery

• 1 x Electromotive swing bolt
• 1 piece strike
• 1 connection cable
• Mounting kit for wide style and narrow style
• Operating instructions