Escape door strike 332.80------E91
Without striking plate, 12 V DC
Product description
The compact construction of the effeff 332.80 allows rapid, straightforward mounting onto a wide variety of door frame and profiles.
Overview of Advantages
- radius keeper
- Compact design
- Min. 2000 N, max. 3000 N holding force in accordance with prEN 13637
- Unlocking under pre-load with 100% holding force
- Monitoring contact is potential-free and armature contact is non-isolated *
- DL/DR and horizontal universal installation position
- Low power consumption
- Compact fitting dimensions
- Adjustable FaFix® latch: 4 mm adjustment range with 0.5 mm increments
- Adjustable with Fix®-grooves in the housing
- Monitoring flap moves together with the FaFix® screw-on attachment, i.e. the switching point always remains the same
- Optionally available with fixed latch
- Adjustable via Fix grooves in housing
Scope of delivery
- 1 piece escape door strike
Note
- Can only be used as a supplementary locking device on fire doors
- * Coupling Relay 7480 is required for parallel operation.
- Armature contact not potential-free. Operation with effeff control terminals without coupling relay possible.
- 12 V, with FaFix®
DIN-direction | universal |
12 V DC | |
Adjustable keeper (FF, FaFix®) | Yes |
Monitoring contact (RR) | Yes |
Diode (05) | Yes |
Fail-unlocked | Yes |
Armature contact (AK/RR) | Yes |
Input operating voltage tolerance range 12 V | ± 10% |
Nominal resistance 12 V | 63 Ohm |
Switching capacity - monitoring contact | 24 V/ 1 A |
Current consumption 12 V DC | 180 mA |
Break-in resistance | 3000 N |
Height | 78.7 mm |
Width | 20 mm |
Depth | 28 mm |
Latch bolt engaging depth | 6 mm |
FaFix® adjustment range | 4 mm |
Max. pre-load | 3000 N |
Operating temperature range | -15 °C to +40 °C |
Continuous function load cycles | 200000 |
Load cycles for in-plant test | 500000 |
Installation position | Vertical and horizontal |
| Order number | Product |
---|---|---|
7480--------E00 | Coupling Relay Model 7480 12 V for escape door 332® | |
807-10-------00 | Model 807-10 Adjustable; 110 x 24 mm | |
807-11-------00 | Model 807-11 Adjustable; 135 x 20 mm | |
807-12-------00 | Model 807-12 Adjustable; 110 x 24 mm; radius forend | |
807-13-------00 | Mortise latch bolt lock model 807 radius Adjustable; 110 x 20 mm; radius strike plate | |
-------A0135-04 | Surface-Mounted Housing Model A01 Ground stainless steel; DIN left |