Security door closer DC700G-FT
For single-leaf doors up to a leaf width of 1,200mm, non-hinge side, with integrated latch lock and escape door strike in the guide rail
Product description
ASSA ABLOY door closer with Cam-Motion® technology, extended mounting plate and integrated latch bolt, extended guide rail with integrated escape door strike
Suitable for retrofitting to fire rated door with door closer with guide rail and fixing using drilling template according to DIN EN 1154, supplementary sheet 1:2003-11
Suitable for fire and smoke protection doors
Certified in compliance with EN 1154, size 3-6
Escape door strike 332®, tested in compliance with the guideline for electrical locking systems for doors along escape routes
For single-leaf doors, door width 850 - 1,200 mm
Overview of Advantages
- Integrated latch bolt 807 on extended mounting plate
- With 4 m connecting cable
- Cable routing flush or surface-mounted possible
- Can be used for left and right-handed doors
- Standard installation on hinge side
- Variable adjustable closing force
- Closing speed, latching speed and backcheck continuously adjustable
- Thermodynamic valves for consistent performance
- Axis continuously height adjustable up to 14 mm
- Standard colours: silver EV1, stainless steel-design
Performance characteristics escape door lock
- Holding force of 2000 N
- Latch position continuously adjustable between 12 mm and 17 mm
- Latch position adjustable horizontally between -3 mm and +6 mm
- Latch bolt can be adjusted vertically in 4 mm increments (-4/ 0/ +4/ +8)
- Escape door strike using FaFix®, adjustable by 2 mm (0.5 mm steps)
Characteristics of guide rail
- Height adjustable by 2 mm for tolerance
- Concealed fixing screws
view construction details
| Rated voltage | 12 V DC / 24 V DC |
| Rated current | 190 mA / 12 V; 95 mA / 24 V |
| Rated operating voltage tolerance range | +/- 10 % |
| Closing force | EN 3-6 |
| Door width up to | 850-1200 mm |
| Suitable for fire doors | Yes |
| Mounting method | Standard installation on hinge side |
| Closing speed | Variable between 170°-10° |
| Latching speed | Variable between 10°-0° |
| Backcheck effect | Variable above 75° |
| Max. door opening angle hinge side | ca. 170° |
| Certified in compliance with | Door closer: DIN EN 1154 / escape door strike: EltVTR |
| Weight | 8.2 kg |
| Dimensions door closer | 727 x 66 x 66 mm |
| Dimensions guide rail | 727 x 30 x 44 mm |
| CE marking for building products | Yes |
| Holding force | 2000 N |
| Operating temperature range | -15 °C to +40 °C |
| Armature contact | Yes |
| Recovery diode | Yes |
| System certification in compliance with EltVTR | effeff escape door control units |
| Order number | Description |
|---|---|
| DC700FT0-FDEV1- | Hinge side, 24 V DC, silver EV1 |
| DC700FT0-FD35-- | Hinge side, 24 V DC, stainless steel design |
| DC700FT0-EDEV1- | Hinge side, 12 V DC, silver EV1 |
| DC700FT0-ED35-- | Hinge side, 12 V DC, stainless steel design |
| | Order number | Product |
|---|---|---|
 | DCFA01-----EV1- | Spacer plate For DC700G-FT, for thin rebate doors, 5 mm, silver EV1 |
| DCFA02-----EV1- | Spacer plate For DC700G-FT, for thick rebate doors, 15 mm, silver EV1 |
| DCFA03-----EV1- | Replacement plate For competitor's guide rail drilling template, 5 mm, silver EV1 |
| DCFA04-----EV1- | Replacement plate For competitor's guide rail drilling template, 15 mm, silver EV1 |
| DCFA05-----EV1- | Mounting and replacement plate For DC700G-FT, narrow frame, 5 mm, silver EV1 |
| DCFA06-----EV1- | Mounting and replacement plate For DC700G-FT, narrow frame, 15 mm, silver EV1 |
 | DCA188--------- | Backcheck For slide rail G-E / G-S / G-S-M / G-FMS / G-FT / G150 / G-CO / G-CO-C / G-CO-E / G-CO-CE / G-CO-S / G-CO-S-M / G-CO-CS / G-CO-CM / G-CO-FMS / DC700G-CO-FT |