Delta panic security mortise lock 19466PBa

Overview of Advantages

• Additional security: Additional latch to the top
• Version with round cylinder or profile cylinder
• Backset: 30 - 60mm
• No
• Certification according to EN 1125
• Certification according to EN 1634-1 to 3
• Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

• With these mortise locks, a door handle, panic door fitting or a pushbar is mounted on the inside of the door. A door handle is also mounted on the outside of the door. In unlocked state, the door can be opened from both sides. In locked state, the door can not be opened from the outside, but can always be opened from the inside (panic function inwards opening), the long bolt is retracted and the flip latch is released at the same time. The lock locks automatically when the door closes (automatic locking). The spindle (follower) is split with panic function B. This panic function is suitable for doors that also have to be opened from the outside at specific times (daytime operation). Daytime operation can be activated via the cylinder, with a key turned in the direction of opening to the stop - the door handle is then engaged on the outside of the door

Area of Application

• Security, private service doors, fire doors and escape route doors
• Metal doors (profile doors)

Note

• On the frame side, only use bolt switch contact MSL 1886.
• Use special profile half spindle MSL 5968