DELTA tubular frame panic mortise lock 19466PBa.2

Overview of Advantages

• Additional security: Additional latch to the toplCertification in accordance with EN 179lCertification in accordance with EN 1125lCertification in accordance with EN 1634-1 to 3lBurglary resistance up to class RC2 can be achieved in suitable door systems

Product description

• With these mortise locks, a door handle, panic door fitting or a pushbar is mounted on the inside of the door. A door handle is also mounted on the outside of the door. In unlocked state, the door can be opened from both sides. In locked state, the door can not be opened from the outside, but can always be opened from the inside (panic function inwards opening), the long bolt is retracted and the flip latch is released at the same time. The lock locks automatically when the door closes (automatic locking). The spindle (follower) is split with panic function B. This panic function is suitable for doors that also have to be opened from the outside at specific times (daytime operation). Daytime operation can be activated via the cylinder, with a key turned in the direction of opening to the stop - the door handle is then engaged on the outside of the door

Area of Application

• Security, private service doors, fire doors and escape route doors
• Metal doors (profile doors)

Note

• On the frame side, only use bolt switch contact MSL 1886.
• Use special profile half spindle MSL 5968