sFlipLock check panic security mortise lock 14474PE-ZF.6

Overview of Advantages

• Monitoring and feedback of the lock status
• Flip latch with sound insulation
• Easy to open under pre-load
• With latch-bolt function
• Certification according to EN 1125
• Certification according to EN 1634-1 to 3
• Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

• These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). Exit through the locked door is possible at any time via the inside door handle contact handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the handle, panic fitting or pushbar Automatic locking when the door is closed via switch lock triggering

Area of Application

• For double-leaf full panic doors
• For access control and monitoring in building management
• Security, escape route and fire doors in commercial, public and industrial buildings
• Public buildings in combination with access components

Note

• Suitable for freewheeling cylinders. For the U-shaped version, the accessory shim B-14421 is required. In combination with the passive leaf locking system 24413 or 24473. The leaf locking system must be ordered separately. The backset 45/50/65 is only available on request.
• Connecting cable check must be ordered separately.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Only for system partners with a training certificate