Panic security mortise lock with contacts and panic function E 14474PE

Panic function E with contacts

Overview of Advantages

  • Monitoring and feedback of the lock status
  • Flip latch with sound insulation
  • Easy to open under pre-load
  • With latch-bolt function
  • Version with round cylinder or profile cylinder
  • Backset: 30 - 80mm
  • Round face plate in 18mm / 20mm width or square face plate 24mm
  • No
  • Certification according to EN 1125
  • Approved in accordance with EN 1634-1 to 3 Intrusion resistance up to Class RC2 achievable in suitable door systems

Product description

  • These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. The lock locks automatically when the door closes (automatic locking).

Area of Application

  • For access control and monitoring in building management:
  • Security doors, escape route and fire doors in commercial and public buildings
  • Internal building area in combination with access components

Note

  • Suitable for freewheeling cylinders. For the U-shaped version, the accessory shim B-14421 is required. Backset 45/50/65 on request.
  • Round rosettes (cross-screwed) only from backset 45 mm.
  • Connecting cable check must be ordered separately.
  • Only for system partners with a training certificate
Technical data
Bolt throw20 mm
Latchnot reversible
Surfacegalvanized
Version1-point locking
Latch materialstainless steel
material boltstainless steel
Alternative functionYes
Material faceplateINOX matt
material boltstainless steel
Follower9, one-piece
Dimensions of latch bolt mating componentFlip latch
Variants that can be ordered
Order number
Type of cylinder
Backset
Faceplate dimensions
Forend shape
Follower
DIN-direction
14610202RZ – round cylinder30320x18x3rounded9, one-pieceLeft
14610201RZ – round cylinder30320x18x3rounded9, one-pieceRight
14610242RZ – round cylinder30320x20x3rounded9, one-pieceLeft
14610241RZ – round cylinder30320x20x3rounded9, one-pieceRight
14610282RZ – round cylinder30320x24x3Square9, one-pieceLeft
14610281RZ – round cylinder30320x24x3Square9, one-pieceRight
14610204RZ – round cylinder35320x18x3rounded9, one-pieceLeft
14610203RZ – round cylinder35320x18x3rounded9, one-pieceRight
14610244RZ – round cylinder35320x20x3rounded9, one-pieceLeft
14610243RZ – round cylinder35320x20x3rounded9, one-pieceRight
14610284RZ – round cylinder35320x24x3Square9, one-pieceLeft
14610283RZ – round cylinder35320x24x3Square9, one-pieceRight
14610206RZ – round cylinder40320x18x3rounded9, one-pieceLeft
14610205RZ – round cylinder40320x18x3rounded9, one-pieceRight
14610246RZ – round cylinder40320x20x3rounded9, one-pieceLeft
14610245RZ – round cylinder40320x20x3rounded9, one-pieceRight
14610286RZ – round cylinder40320x24x3Square9, one-pieceLeft
14610285RZ – round cylinder40320x24x3Square9, one-pieceRight
14610212RZ – round cylinder60320x18x3rounded9, one-pieceLeft
14610211RZ – round cylinder60320x18x3rounded9, one-pieceRight
14610252RZ – round cylinder60320x20x3rounded9, one-pieceLeft
14610251RZ – round cylinder60320x20x3rounded9, one-pieceRight
14610292RZ – round cylinder60320x24x3Square9, one-pieceLeft
14610291RZ – round cylinder60320x24x3Square9, one-pieceRight
14610214RZ – round cylinder70320x18x3rounded9, one-pieceLeft
14610213RZ – round cylinder70320x18x3rounded9, one-pieceRight
14610254RZ – round cylinder70320x20x3rounded9, one-pieceLeft
14610253RZ – round cylinder70320x20x3rounded9, one-pieceRight
14610294RZ – round cylinder70320x24x3Square9, one-pieceLeft
14610293RZ – round cylinder70320x24x3Square9, one-pieceRight
14610216RZ – round cylinder80320x18x3rounded9, one-pieceLeft
14610215RZ – round cylinder80320x18x3rounded9, one-pieceRight
14610256RZ – round cylinder80320x20x3rounded9, one-pieceLeft
14610255RZ – round cylinder80320x20x3rounded9, one-pieceRight
14610296RZ – round cylinder80320x24x3Square9, one-pieceLeft
14610295RZ – round cylinder80320x24x3Square9, one-pieceRight
14610222PZ – profile cylinder30320x18x3rounded9, one-pieceLeft
14610221PZ – profile cylinder30320x18x3rounded9, one-pieceRight
14610262PZ – profile cylinder30320x20x3rounded9, one-pieceLeft
14610261PZ – profile cylinder30320x20x3rounded9, one-pieceRight
14610302PZ – profile cylinder30320x24x3Square9, one-pieceLeft
14610301PZ – profile cylinder30320x24x3Square9, one-pieceRight
14610224PZ – profile cylinder35320x18x3rounded9, one-pieceLeft
14610223PZ – profile cylinder35320x18x3rounded9, one-pieceRight
14610264PZ – profile cylinder35320x20x3rounded9, one-pieceLeft
14610263PZ – profile cylinder35320x20x3rounded9, one-pieceRight
14610304PZ – profile cylinder35320x24x3Square9, one-pieceLeft
14610303PZ – profile cylinder35320x24x3Square9, one-pieceRight
14610226PZ – profile cylinder40320x18x3rounded9, one-pieceLeft
14610225PZ – profile cylinder40320x18x3rounded9, one-pieceRight
14610266PZ – profile cylinder40320x20x3rounded9, one-pieceLeft
14610265PZ – profile cylinder40320x20x3rounded9, one-pieceRight
14610306PZ – profile cylinder40320x24x3Square9, one-pieceLeft
14610305PZ – profile cylinder40320x24x3Square9, one-pieceRight
14610232PZ – profile cylinder60320x18x3rounded9, one-pieceLeft
14610231PZ – profile cylinder60320x18x3rounded9, one-pieceRight
14610272PZ – profile cylinder60320x20x3rounded9, one-pieceLeft
14610271PZ – profile cylinder60320x20x3rounded9, one-pieceRight
14610312PZ – profile cylinder60320x24x3Square9, one-pieceLeft
14610311PZ – profile cylinder60320x24x3Square9, one-pieceRight
14610234PZ – profile cylinder70320x18x3rounded9, one-pieceLeft
14610233PZ – profile cylinder70320x18x3rounded9, one-pieceRight
14610274PZ – profile cylinder70320x20x3rounded9, one-pieceLeft
14610273PZ – profile cylinder70320x20x3rounded9, one-pieceRight
14610314PZ – profile cylinder70320x24x3Square9, one-pieceLeft
14610313PZ – profile cylinder70320x24x3Square9, one-pieceRight
14610236PZ – profile cylinder80320x18x3rounded9, one-pieceLeft
14610235PZ – profile cylinder80320x18x3rounded9, one-pieceRight
14610276PZ – profile cylinder80320x20x3rounded9, one-pieceLeft
14610275PZ – profile cylinder80320x20x3rounded9, one-pieceRight
14610316PZ – profile cylinder80320x24x3Square9, one-pieceLeft
14610315PZ – profile cylinder80320x24x3Square9, one-pieceRight
Accessories/Individual parts
 
Order number
Product
Connection cable for s- and mFlipLock check
Datenkabel_FlipLock_checkConnection cable for s- and mFlipLock check
VariFlex sFlipLock striking plate
BV-14421VFVariFlex sFlipLock striking plate
BV-14421PFProfiFlex striking plate
Base plate for U-shaped face plate
B-14421Base plate for U-shaped face plate
Downloads for Product

General

Product sheet Panic security mortise lock with contacts and panic function E 14474PE (PDF)
Operating instructions (PDF, 8.80 MB)

Certificates and attests

Certificate of constancy of performance EN 179 (PDF, 400 KB)
Certificate of constancy of performance EN 1125 FlipLock (PDF, 397 KB)
Certificate of constancy of performance EN 12209 (PDF, 195 KB)

Drawings for Specification Documents

Downloads (DXF, 887 KB)

Medias

Product image (JPG, 210 KB)
Product image (EPS, 13.94 MB)
Technical drawing 1 (JPG, 334 KB)
Technical drawing 1 (EPS, 2.42 MB)
Technical drawing 2 (JPG, 335 KB)
Technical drawing 2 (EPS, 2.39 MB)
Technical drawing 3 (JPG, 336 KB)
Technical drawing 3 (EPS, 2.41 MB)