Panic function D, DIN direction reversible, panic side reversible
Product image 1
Overview of Advantages
DIN direction can be changed without tools
Panic side can be switched
New spring concept with strong compression springs for heavy handles
bolt stroke: single-turn 20 mm,
Certification according to EN 179
Certification according to EN 1125
Certification according to EN 12209
Certification according to EN 1634-1 to 3
Burglary resistant to class RC2 can be achieved in appropriate door systems
Product description
With these mortise locks, a lever handle, panic exit device or pushbar is fitted on the inside of the door. A lever handle is also fitted on the outside of the door. When locked, the door cannot be opened from the outside, but can always be opened from the inside via the lever handle, panic door fitting or pushbar (panic function). The square (follower) is split for panic function D. Once the lever handle has been operated from the inside, the door can also be opened automatically from the outside, i.e. the lever handle is coupled on the outside and the rescue measures are not hindered. With this function, the door must always be locked again with the key to prevent it from being opened from the outside.
Area of Application
Security doors, escape route and fire doors
For new construction and renovation
Note
DIN direction can be changed without tools (DIN left in the factory)
Panic side can be switched
Not suitable for rotary knob cylinders
Only use bolt switch contact MSL 1886 on the frame side
