Panic safety single-point locking system 30103PD.3

Overview of Advantages

• DIN direction can be changed without tools
• Panic side can be switched
• New spring concept with strong compression springs for heavy handles
• bolt stroke: single-turn 20 mm,
• Certification according to EN 179
• Certification according to EN 1125
• Certification according to EN 12209
• Certification according to EN 1634-1 to 3
• Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

• With these mortise locks, a lever handle, panic exit device or pushbar is fitted on the inside of the door. A lever handle is also fitted on the outside of the door. When locked, the door cannot be opened from the outside, but can always be opened from the inside via the lever handle, panic door fitting or pushbar (panic function). The square (follower) is split for panic function D. Once the lever handle has been operated from the inside, the door can also be opened automatically from the outside, i.e. the lever handle is coupled on the outside and the rescue measures are not hindered. With this function, the door must always be locked again with the key to prevent it from being opened from the outside.

Area of Application

• Security doors, escape route and fire doors
• For new construction and renovation

Note

• DIN direction can be changed without tools (DIN left in the factory)
• Panic side can be switched
• Not suitable for rotary knob cylinders
• Only use bolt switch contact MSL 1886 on the frame side
• Use special interchangeable profile pin 5968.