sFlipLock e-access panic security mortise lock, handle-operated 16576PBa-SV

Panic function B, outwards opening, automatic locking, connectible handle, evaluation of lock contacts

Overview of Advantages

  • Electronically engaging door handle
  • Attached motor unit with integrated motor control for the basic open/close function With switched output if the lock has undergone motorised release.
  • Display of the open position and feedback to electric door drives.
  • Opening signal (GND) e.g. via fingerprint, button, switching timer, etc.
  • Electrical interface RS485, e.g. for direct communication via biometrics scanner and error log. Tamper protection opening impulse now only via BUS.
  • Evaluation of potential-free contacts (AWS):Door status (changeover contact), handle panic side (changeover contact), delayed bolt switch contact (changeover contact), bolt switch contact (changeover contact), cylinder contact
  • Motorised opening in 1.5 seconds
  • Low power consumption: 350 mA at 24 V DC
  • Deadbolt stroke, single rotation, 20mm each
  • Mechanical automatic locking system
  • Version with round cylinder or profile cylinder
  • Backset: 30 - 80mm
  • Round face plate in 18 and 20 mm width, square face plate in 24 mm width
  • No
  • Certification according to EN 1125
  • Approved in accordance with EN 1634-1 to 3 with AWS
  • Approved in accordance with EN 12209 Class 7
  • Approved in accordance with EN 18251-2 Class 5
  • Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

  • The sFlipLock e-access handle-operated mortise lock is equipped with a split handle follower so that the inside handle is engaged and the outside handle is not engaged. Typically, a door handle fitting is mounted on both sides of the door and a panic bar or pushbar can be mounted on the inside (in the escape direction). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). When unlocking from outside via an electronic impulse, fingerprint, button, badge or timer switch, the outside handle is engaged and the dead bolt is retracted to 5 mm first. The flip latch is then released by the door handle and the lock is completely released. Emergency opening from the outside is possible at all times via the cylinder when the door is locked. The lock locks automatically again when the door closes (automatic locking). This lock always comes in combination with an evaluation control unit, which enables all contacts of sFlipLock e-access motorised lock to be evaluated. The motorised lock can thus be opened, closed, run in daytime position or locked completely (blocked). The power supply for the motorised lock is also provided by the evaluation control. In emergency mode (power failure / triggering of the central fire alarm system), the motorised lock is locked automatically in open state by an integrated buffer capacitor. With the separate block input (locked), all input signals are decoupled and the motorised lock moves automatically into locked position. This double-leaf version always has a passive leaf lock. Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the handle, panic fitting or pushbar Automatic locking when the door is closed via switch lock triggering

Area of Application

  • Access control and building management applications, incl. bus connection
  • Public buildings, banks, prisons, hospitals (air locks)
  • Access control, security and fire doors in commercial, public and industrial buildings

Note

  • Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-15544 is required. Backset 45/50/65 on request. In combination with an evaluation control unit (AWS) (Art. no.14471401/02). The AWS, connecting cable and striking plates must be ordered separately.
  • Only for system partners with a training certificate
  • Round rosettes (cross-screwed) only from backset 45 mm.
  • Use special profile half spindle MSL 5968
Technical data
Bolt throw20 mm
Latchnot reversible
Surfacegalvanized
Version1-point locking
Latch materialstainless steel
material boltstainless steel
Panic functionBa-SV
Alternative functionNo
Material faceplateINOX matt
material boltstainless steel
Follower9, two part
Dimensions of latch bolt mating componentFlip latch, automatic locking
Variants that can be ordered
Order number
Type of cylinder
Backset
Faceplate dimensions
Forend shape
Follower
DIN-direction
14605402RZ – round cylinder30445x18x3rounded9, two partLeft
14605401RZ – round cylinder30445x18x3rounded9, two partRight
14605442RZ – round cylinder30445x20x3rounded9, two partLeft
14605441RZ – round cylinder30445x20x3rounded9, two partRight
14605482RZ – round cylinder30445x24x3Square9, two partLeft
14605481RZ – round cylinder30445x24x3Square9, two partRight
14605404RZ – round cylinder35445x18x3rounded9, two partLeft
14605403RZ – round cylinder35445x18x3rounded9, two partRight
14605444RZ – round cylinder35445x20x3rounded9, two partLeft
14605443RZ – round cylinder35445x20x3rounded9, two partRight
14605484RZ – round cylinder35445x24x3Square9, two partLeft
14605483RZ – round cylinder35445x24x3Square9, two partRight
14605406RZ – round cylinder40445x18x3rounded9, two partLeft
14605405RZ – round cylinder40445x18x3rounded9, two partRight
14605446RZ – round cylinder40445x20x3rounded9, two partLeft
14605445RZ – round cylinder40445x20x3rounded9, two partRight
14605486RZ – round cylinder40445x24x3Square9, two partLeft
14605485RZ – round cylinder40445x24x3Square9, two partRight
14605412RZ – round cylinder60445x18x3rounded9, two partLeft
14605411RZ – round cylinder60445x18x3rounded9, two partRight
14605452RZ – round cylinder60445x20x3rounded9, two partLeft
14605451RZ – round cylinder60445x20x3rounded9, two partRight
14605492RZ – round cylinder60445x24x3Square9, two partLeft
14605491RZ – round cylinder60445x24x3Square9, two partRight
14605414RZ – round cylinder70445x18x3rounded9, two partLeft
14605413RZ – round cylinder70445x18x3rounded9, two partRight
14605454RZ – round cylinder70445x20x3rounded9, two partLeft
14605453RZ – round cylinder70445x20x3rounded9, two partRight
14605494RZ – round cylinder70445x24x3Square9, two partLeft
14605493RZ – round cylinder70445x24x3Square9, two partRight
14605416RZ – round cylinder80445x18x3rounded9, two partLeft
14605415RZ – round cylinder80445x18x3rounded9, two partRight
14605456RZ – round cylinder80445x20x3rounded9, two partLeft
14605455RZ – round cylinder80445x20x3rounded9, two partRight
14605496RZ – round cylinder80445x24x3Square9, two partLeft
14605495RZ – round cylinder80445x24x3Square9, two partRight
14605422PZ – profile cylinder30445x18x3rounded9, two partLeft
14605421PZ – profile cylinder30445x18x3rounded9, two partRight
14605462PZ – profile cylinder30445x20x3rounded9, two partLeft
14605461PZ – profile cylinder30445x20x3rounded9, two partRight
14605502PZ – profile cylinder30445x24x3Square9, two partLeft
14605501PZ – profile cylinder30445x24x3Square9, two partRight
14605424PZ – profile cylinder35445x18x3rounded9, two partLeft
14605423PZ – profile cylinder35445x18x3rounded9, two partRight
14605464PZ – profile cylinder35445x20x3rounded9, two partLeft
14605463PZ – profile cylinder35445x20x3rounded9, two partRight
14605504PZ – profile cylinder35445x24x3Square9, two partLeft
14605503PZ – profile cylinder35445x24x3Square9, two partRight
14605426PZ – profile cylinder40445x18x3rounded9, two partLeft
14605425PZ – profile cylinder40445x18x3rounded9, two partRight
14605466PZ – profile cylinder40445x20x3rounded9, two partLeft
14605465PZ – profile cylinder40445x20x3rounded9, two partRight
14605506PZ – profile cylinder40445x24x3Square9, two partLeft
14605505PZ – profile cylinder40445x24x3Square9, two partRight
14605432PZ – profile cylinder60445x18x3rounded9, two partLeft
14605431PZ – profile cylinder60445x18x3rounded9, two partRight
14605472PZ – profile cylinder60445x20x3rounded9, two partLeft
14605471PZ – profile cylinder60445x20x3rounded9, two partRight
14605512PZ – profile cylinder60445x24x3Square9, two partLeft
14605511PZ – profile cylinder60445x24x3Square9, two partRight
14605434PZ – profile cylinder70445x18x3rounded9, two partLeft
14605433PZ – profile cylinder70445x18x3rounded9, two partRight
14605474PZ – profile cylinder70445x20x3rounded9, two partLeft
14605473PZ – profile cylinder70445x20x3rounded9, two partRight
14605514PZ – profile cylinder70445x24x3Square9, two partLeft
14605513PZ – profile cylinder70445x24x3Square9, two partRight
14605436PZ – profile cylinder80445x18x3rounded9, two partLeft
14605435PZ – profile cylinder80445x18x3rounded9, two partRight
14605476PZ – profile cylinder80445x20x3rounded9, two partLeft
14605475PZ – profile cylinder80445x20x3rounded9, two partRight
14605516PZ - profile cylinder80445x24x3Square9, two partLeft
14605515PZ – profile cylinder80445x24x3Square9, two partRight