sFlipLock check panic security mortise lock 14474PE-ZF

Panic function E, double-leaf, with contacts

Overview of Advantages

  • Monitoring and feedback of the lock status
  • Flip latch with sound insulation
  • Easy to open under pre-load
  • With latch-bolt function
  • Version with round cylinder or profile cylinder
  • Backset: 30 - 80mm
  • Round face plate in 18mm / 20mm width or square face plate 24mm
  • Certification according to EN 1125
  • Certification according to EN 1634-1 to 3
  • Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

  • These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). Exit through the locked door is possible at any time via the inside door handle contact handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the handle, panic fitting or pushbar Automatic locking when the door is closed via switch lock triggering

Area of Application

  • For double-leaf full panic doors
  • For access control and monitoring in building management
  • Security, escape route and fire doors in commercial, public and industrial buildings
  • Public buildings in combination with access components

Note

  • Suitable for freewheeling cylinders. For the U-shaped version, the accessory shim B-14421 is required. In combination with the passive leaf locking system 24413 or 24473. The leaf locking system must be ordered separately. The backset 45/50/65 is only available on request.
  • Connecting cable check must be ordered separately.
  • Round rosettes (cross-screwed) only from backset 45 mm.
  • Only for system partners with a training certificate
Technical data
Bolt throw20 mm
Latchnot reversible
Surfacegalvanized
Version1-point locking, double-leaf
Latch materialstainless steel
material boltstainless steel
Panic functionE
Alternative functionYes
Material faceplateINOX matt
material boltstainless steel
Follower9, one-piece
Dimensions of latch bolt mating componentFlip latch
Variants that can be ordered
Order number
Type of cylinder
Backset
Faceplate dimensions
Forend shape
Follower
DIN-direction
14611602RZ – round cylinder30320x18x3rounded9, one-pieceLeft
14611601RZ – round cylinder30320x18x3rounded9, one-pieceRight
14611642RZ – round cylinder30320x20x3rounded9, one-pieceLeft
14611641RZ – round cylinder30320x20x3rounded9, one-pieceRight
14611682RZ – round cylinder30320x24x3Square9, one-pieceLeft
14611681RZ – round cylinder30320x24x3Square9, one-pieceRight
14611604RZ – round cylinder35320x18x3rounded9, one-pieceLeft
14611603RZ – round cylinder35320x18x3rounded9, one-pieceRight
14611644RZ – round cylinder35320x20x3rounded9, one-pieceLeft
14611643RZ – round cylinder35320x20x3rounded9, one-pieceRight
14611684RZ – round cylinder35320x24x3Square9, one-pieceLeft
14611683RZ – round cylinder35320x24x3Square9, one-pieceRight
14611606RZ – round cylinder40320x18x3rounded9, one-pieceLeft
14611605RZ – round cylinder40320x18x3rounded9, one-pieceRight
14611646RZ – round cylinder40320x20x3rounded9, one-pieceLeft
14611645RZ – round cylinder40320x20x3rounded9, one-pieceRight
14611686RZ – round cylinder40320x24x3Square9, one-pieceLeft
14611685RZ – round cylinder40320x24x3Square9, one-pieceRight
14611612RZ – round cylinder60320x18x3rounded9, one-pieceLeft
14611611RZ – round cylinder60320x18x3rounded9, one-pieceRight
14611652RZ – round cylinder60320x20x3rounded9, one-pieceLeft
14611651RZ – round cylinder60320x20x3rounded9, one-pieceRight
14611692RZ – round cylinder60320x24x3Square9, one-pieceLeft
14611691RZ – round cylinder60320x24x3Square9, one-pieceRight
14611614RZ – round cylinder70320x18x3rounded9, one-pieceLeft
14611613RZ – round cylinder70320x18x3rounded9, one-pieceRight
14611654RZ – round cylinder70320x20x3rounded9, one-pieceLeft
14611653RZ – round cylinder70320x20x3rounded9, one-pieceRight
14611694RZ – round cylinder70320x24x3Square9, one-pieceLeft
14611693RZ – round cylinder70320x24x3Square9, one-pieceRight
14611616RZ – round cylinder80320x18x3rounded9, one-pieceLeft
14611615RZ – round cylinder80320x18x3rounded9, one-pieceRight
14611656RZ – round cylinder80320x20x3rounded9, one-pieceLeft
14611655RZ – round cylinder80320x20x3rounded9, one-pieceRight
14611696RZ – round cylinder80320x24x3Square9, one-pieceLeft
14611695RZ – round cylinder80320x24x3Square9, one-pieceRight
14611622PZ – profile cylinder30320x18x3rounded9, one-pieceLeft
14611621PZ – profile cylinder30320x18x3rounded9, one-pieceRight
14611662PZ – profile cylinder30320x20x3rounded9, one-pieceLeft
14611661PZ – profile cylinder30320x20x3rounded9, one-pieceRight
14611702PZ – profile cylinder30320x24x3Square9, one-pieceLeft
14611701PZ – profile cylinder30320x24x3Square9, one-pieceRight
14611624PZ – profile cylinder35320x18x3rounded9, one-pieceLeft
14611623PZ – profile cylinder35320x18x3rounded9, one-pieceRight
14611664PZ – profile cylinder35320x20x3rounded9, one-pieceLeft
14611663PZ – profile cylinder35320x20x3rounded9, one-pieceRight
14611704PZ – profile cylinder35320x24x3Square9, one-pieceLeft
14611703PZ – profile cylinder35320x24x3Square9, one-pieceRight
14611626PZ – profile cylinder40320x18x3rounded9, one-pieceLeft
14611625PZ – profile cylinder40320x18x3rounded9, one-pieceRight
14611666PZ – profile cylinder40320x20x3rounded9, one-pieceLeft
14611665PZ – profile cylinder40320x20x3rounded9, one-pieceRight
14611706PZ – profile cylinder40320x24x3Square9, one-pieceLeft
14611705PZ – profile cylinder40320x24x3Square9, one-pieceRight
14611632PZ – profile cylinder60320x18x3rounded9, one-pieceLeft
14611631PZ – profile cylinder60320x18x3rounded9, one-pieceRight
14611672PZ – profile cylinder60320x20x3rounded9, one-pieceLeft
14611671PZ – profile cylinder60320x20x3rounded9, one-pieceRight
14611712PZ – profile cylinder60320x24x3Square9, one-pieceLeft
14611711PZ – profile cylinder60320x24x3Square9, one-pieceRight
14611634PZ – profile cylinder70320x18x3rounded9, one-pieceLeft
14611633PZ – profile cylinder70320x18x3rounded9, one-pieceRight
14611674PZ – profile cylinder70320x20x3rounded9, one-pieceLeft
14611673PZ – profile cylinder70320x20x3rounded9, one-pieceRight
14611714PZ – profile cylinder70320x24x3Square9, one-pieceLeft
14611713PZ – profile cylinder70320x24x3Square9, one-pieceRight
14611636PZ – profile cylinder80320x18x3rounded9, one-pieceLeft
14611635PZ – profile cylinder80320x18x3rounded9, one-pieceRight
14611676PZ – profile cylinder80320x20x3rounded9, one-pieceLeft
14611675PZ – profile cylinder80320x20x3rounded9, one-pieceRight
14611716PZ – profile cylinder80320x24x3Square9, one-pieceLeft
14611715PZ – profile cylinder80320x24x3Square9, one-pieceRight
Accessories/Individual parts
 
Order number
Product
Panic passive leaf locking system
24473-HPanic passive leaf locking system
With contacts and automatic locking upwards and downwards, suitable for all double-leaf sFlipLock and mFlipLock locks in wooden doors.
Panic passive leaf locking system
24473-MPanic passive leaf locking system
With contacts, automatic locking upwards and downwards, suitable for all double-leaf sFlipLock and mFlipLock locks in metal doors.
Base plate for U-shaped face plate
B-14421Base plate for U-shaped face plate
Downloads for Product

General

Product sheet sFlipLock check panic security mortise lock 14474PE-ZF (PDF)
Operating instructions (PDF, 8.80 MB)

Certificates and attests

Certificate of constancy of performance EN 179 (PDF, 400 KB)
Certificate of constancy of performance EN 1125 FlipLock (PDF, 397 KB)
Certificate of constancy of performance EN 12209 (PDF, 195 KB)

Drawings for Specification Documents

Downloads (DXF, 1.10 MB)

Medias

Product image (JPG, 185 KB)
Product image (EPS, 11.72 MB)
Technical drawing 1 (JPG, 339 KB)
Technical drawing 1 (EPS, 2.39 MB)
Technical drawing 2 (JPG, 339 KB)
Technical drawing 2 (EPS, 2.39 MB)
Technical drawing 3 (JPG, 333 KB)
Technical drawing 3 (EPS, 2.43 MB)