sFlipLock check panic security mortise lock 14574PE-SV-TF-ZF

Panic function E, double-leaf, with contacts, automatic locking, daytime release function

Overview of Advantages

  • Monitoring and feedback of the lock status
  • Flip latch with sound insulation
  • Mechanical automatic locking system
  • Mechanical applyable daytime release function
  • Easy to open under pre-load
  • With latch-bolt function
  • Version with round cylinder or profile cylinder
  • Certification according to EN 179
  • Certification according to EN 1125
  • Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

  • These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). These locks are also available equipped with a mechanically activated daytime release function (key rotation in locking direction to the stop in open state). This means that the doors can be passed through from both sides, because the flip latch is unlocked and acts like a roller keep. If daytime release function is switched off, (key rotation in opening direction in open state), the lock locks automatically when the door is closed (automatic locking). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the handle, panic fitting or pushbar Automatic locking when the door is closed via switch lock triggering

Area of Application

  • For double-leaf full panic doors
  • For access control and monitoring in building management
  • Security, escape route and fire doors in commercial, public and industrial buildings
  • Public buildings in combination with access components

Note

  • Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-14421 is required. In combination with the passive leaf locking system 24413 or 24473. The leaf locking system must be ordered separately. The backset 45/50/65 is only available on request.
  • Connecting cable check must be ordered separately.
  • Round rosettes (cross-screwed) only from backset 45 mm.
  • Only for system partners with a training certificate
Technical data
Bolt throw20 mm
Latchnot reversible
Surfacegalvanized
Version1-point locking, double-leaf and daytime release function
Latch materialstainless steel
material boltstainless steel
Panic functionE-SV
Alternative functionYes
Material faceplateINOX matt
material boltstainless steel
Follower9, one-piece
Dimensions of latch bolt mating componentFlip latch
Variants that can be ordered
Order number
Type of cylinder
Backset
Faceplate dimensions
Forend shape
Follower
DIN-direction
14612002RZ – round cylinder30320x18x3rounded9, one-pieceLeft
14612001RZ – round cylinder30320x18x3rounded9, one-pieceRight
14612042RZ – round cylinder30320x20x3rounded9, one-pieceLeft
14612041RZ – round cylinder30320x20x3rounded9, one-pieceRight
14612082RZ – round cylinder30320x24x3Square9, one-pieceLeft
14612081RZ – round cylinder30320x24x3Square9, one-pieceRight
14612004RZ – round cylinder35320x18x3rounded9, one-pieceLeft
14612003RZ – round cylinder35320x18x3rounded9, one-pieceRight
14612044RZ – round cylinder35320x20x3rounded9, one-pieceLeft
14612043RZ – round cylinder35320x20x3rounded9, one-pieceRight
14612084RZ – round cylinder35320x24x3Square9, one-pieceLeft
14612083RZ – round cylinder35320x24x3Square9, one-pieceRight
14612006RZ – round cylinder40320x18x3rounded9, one-pieceLeft
14612005RZ – round cylinder40320x18x3rounded9, one-pieceRight
14612046RZ – round cylinder40320x20x3rounded9, one-pieceLeft
14612045RZ – round cylinder40320x20x3rounded9, one-pieceRight
14612086RZ – round cylinder40320x24x3Square9, one-pieceLeft
14612085RZ – round cylinder40320x24x3Square9, one-pieceRight
14612012RZ – round cylinder60320x18x3rounded9, one-pieceLeft
14612011RZ – round cylinder60320x18x3rounded9, one-pieceRight
14612052RZ – round cylinder60320x20x3rounded9, one-pieceLeft
14612051RZ – round cylinder60320x20x3rounded9, one-pieceRight
14612092RZ – round cylinder60320x24x3Square9, one-pieceLeft
14612091RZ – round cylinder60320x24x3Square9, one-pieceRight
14612014RZ – round cylinder70320x18x3rounded9, one-pieceLeft
14612013RZ – round cylinder70320x18x3rounded9, one-pieceRight
14612054RZ – round cylinder70320x20x3rounded9, one-pieceLeft
14612053RZ – round cylinder70320x20x3rounded9, one-pieceRight
14612094RZ – round cylinder70320x24x3Square9, one-pieceLeft
14612093RZ – round cylinder70320x24x3Square9, one-pieceRight
14612016RZ – round cylinder80320x18x3rounded9, one-pieceLeft
14612015RZ – round cylinder80320x18x3rounded9, one-pieceRight
14612056RZ – round cylinder80320x20x3rounded9, one-pieceLeft
14612055RZ – round cylinder80320x20x3rounded9, one-pieceRight
14612096RZ – round cylinder80320x24x3Square9, one-pieceLeft
14612095RZ – round cylinder80320x24x3Square9, one-pieceRight
14612022PZ – profile cylinder30320x18x3rounded9, one-pieceLeft
14612021PZ – profile cylinder30320x18x3rounded9, one-pieceRight
14612062PZ – profile cylinder30320x20x3rounded9, one-pieceLeft
14612061PZ – profile cylinder30320x20x3rounded9, one-pieceRight
14612102PZ – profile cylinder30320x24x3Square9, one-pieceLeft
14612101PZ – profile cylinder30320x24x3Square9, one-pieceRight
14612024PZ – profile cylinder35320x18x3rounded9, one-pieceLeft
14612023PZ – profile cylinder35320x18x3rounded9, one-pieceRight
14612064PZ – profile cylinder35320x20x3rounded9, one-pieceLeft
14612063PZ – profile cylinder35320x20x3rounded9, one-pieceRight
14612104PZ – profile cylinder35320x24x3Square9, one-pieceLeft
14612103PZ – profile cylinder35320x24x3Square9, one-pieceRight
14612026PZ – profile cylinder40320x18x3rounded9, one-pieceLeft
14612025PZ – profile cylinder40320x18x3rounded9, one-pieceRight
14612066PZ – profile cylinder40320x20x3rounded9, one-pieceLeft
14612065PZ – profile cylinder40320x20x3rounded9, one-pieceRight
14612106PZ – profile cylinder40320x24x3Square9, one-pieceLeft
14612105PZ – profile cylinder40320x24x3Square9, one-pieceRight
14612032PZ – profile cylinder60320x18x3rounded9, one-pieceLeft
14612031PZ – profile cylinder60320x18x3rounded9, one-pieceRight
14612072PZ – profile cylinder60320x20x3rounded9, one-pieceLeft
14612071PZ – profile cylinder60320x20x3rounded9, one-pieceRight
14612112PZ – profile cylinder60320x24x3Square9, one-pieceLeft
14612111PZ – profile cylinder60320x24x3Square9, one-pieceRight
14612034PZ – profile cylinder70320x18x3rounded9, one-pieceLeft
14612033PZ – profile cylinder70320x18x3rounded9, one-pieceRight
14612074PZ – profile cylinder70320x20x3rounded9, one-pieceLeft
14612073PZ – profile cylinder70320x20x3rounded9, one-pieceRight
14612114PZ – profile cylinder70320x24x3Square9, one-pieceLeft
14612113PZ – profile cylinder70320x24x3Square9, one-pieceRight
14612036PZ – profile cylinder80320x18x3rounded9, one-pieceLeft
14612035PZ – profile cylinder80320x18x3rounded9, one-pieceRight
14612076PZ – profile cylinder80320x20x3rounded9, one-pieceLeft
14612075PZ – profile cylinder80320x20x3rounded9, one-pieceRight
14612116PZ – profile cylinder80320x24x3Square9, one-pieceLeft
14612115PZ – profile cylinder80320x24x3Square9, one-pieceRight
Accessories/Individual parts
 
Order number
Product
Panic passive leaf locking system
24473-H-TFPanic passive leaf locking system
With contacts, automatic locking upwards and downwards and manually activated daytime release function, suitable for all double-leaf sFlipLock and mFlipLock locks in wooden doors.
Panic passive leaf locking system
24473-M-TFPanic passive leaf locking system
With contacts, automatic locking upwards and downwards and manually activated daytime release function, suitable for all double-leaf sFlipLock and mFlipLock locks in metal doors.
Base plate for U-shaped face plate
B-14421Base plate for U-shaped face plate
Downloads for Product

General

Product sheet sFlipLock check panic security mortise lock 14574PE-SV-TF-ZF (PDF)
Operating instructions (PDF, 8.80 MB)

Certificates and attests

Certificate of constancy of performance EN 179 (PDF, 400 KB)
Certificate of constancy of performance EN 1125 FlipLock (PDF, 397 KB)
Certificate of constancy of performance EN 12209 (PDF, 195 KB)

Drawings for Specification Documents

Downloads (DXF, 889 KB)

Medias

Product image (JPG, 185 KB)
Product image (EPS, 11.72 MB)
Technical drawing 1 (JPG, 393 KB)
Technical drawing 1 (EPS, 2.38 MB)
Technical drawing 2 (JPG, 395 KB)
Technical drawing 2 (EPS, 2.36 MB)
Technical drawing 3 (JPG, 390 KB)
Technical drawing 3 (EPS, 2.38 MB)