sFlipLock check panic security mortise lock 14574PE-SV-ZF

Panic function E, double-leaf, with contacts, automatic locking

Overview of Advantages

  • Monitoring and feedback of the lock status
  • Flip latch with sound insulation
  • Mechanical automatic locking
  • Easy to open under pre-load
  • With latch-bolt function
  • Version with round cylinder or profile cylinder
  • Backset: 30 - 80mm
  • Round face plate in 18mm / 20mm width or square face plate 24mm
  • Certification according to EN 1125
  • Certification according to EN 1634-1 to 3
  • Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

  • These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, dead bolt status and cylinder status). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. The lock locks automatically when the door closes (automatic locking). Only available in combination with a panic inactive leaf locking system. This enables the door to be opened at all times, even if the lock on the active leaf is locked (panic function), via the handle, panic fitting or pushbar Automatic locking when the door is closed via switch lock triggering

Area of Application

  • For double-leaf full panic doors
  • For access control and monitoring in building management
  • Security, escape route and fire doors in commercial, public and industrial buildings
  • Public buildings in combination with access components

Note

  • Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-14421 is required. In combination with the passive leaf locking system 24413 or 24473. The leaf locking system must be ordered separately. The backset 45/50/65 is only available on request.
  • Connecting cable check must be ordered separately.
  • Round rosettes (cross-screwed) only from backset 45 mm.
  • Only for system partners with a training certificate
Technical data
Bolt throw20 mm
Latchnot reversible
Surfacegalvanized
Version1-point locking, double-leaf
Latch materialstainless steel
material boltstainless steel
Panic functionE-SV
Alternative functionYes
Material faceplateINOX matt
material boltstainless steel
Follower9, one-piece
Dimensions of latch bolt mating componentFlip latch
Variants that can be ordered
Order number
Type of cylinder
Backset
Faceplate dimensions
Forend shape
Follower
DIN-direction
14611802RZ – round cylinder30320x18x3rounded9, one-pieceLeft
14611801RZ – round cylinder30320x18x3rounded9, one-pieceRight
14611842RZ – round cylinder30320x20x3rounded9, one-pieceLeft
14611841RZ – round cylinder30320x20x3rounded9, one-pieceRight
14611882RZ – round cylinder30320x24x3Square9, one-pieceLeft
14611881RZ – round cylinder30320x24x3Square9, one-pieceRight
14611804RZ – round cylinder35320x18x3rounded9, one-pieceLeft
14611803RZ – round cylinder35320x18x3rounded9, one-pieceRight
14611844RZ – round cylinder35320x20x3rounded9, one-pieceLeft
14611843RZ – round cylinder35320x20x3rounded9, one-pieceRight
14611884RZ – round cylinder35320x24x3Square9, one-pieceLeft
14611883RZ – round cylinder35320x24x3Square9, one-pieceRight
14611806RZ – round cylinder40320x18x3rounded9, one-pieceLeft
14611805RZ – round cylinder40320x18x3rounded9, one-pieceRight
14611846RZ – round cylinder40320x20x3rounded9, one-pieceLeft
14611845RZ – round cylinder40320x20x3rounded9, one-pieceRight
14611886RZ – round cylinder40320x24x3Square9, one-pieceLeft
14611885RZ – round cylinder40320x24x3Square9, one-pieceRight
14611812RZ – round cylinder60320x18x3rounded9, one-pieceLeft
14611811RZ – round cylinder60320x18x3rounded9, one-pieceRight
14611852RZ – round cylinder60320x20x3rounded9, one-pieceLeft
14611851RZ – round cylinder60320x20x3rounded9, one-pieceRight
14611892RZ – round cylinder60320x24x3Square9, one-pieceLeft
14611891RZ – round cylinder60320x24x3Square9, one-pieceRight
14611814RZ – round cylinder70320x18x3rounded9, one-pieceLeft
14611813RZ – round cylinder70320x18x3rounded9, one-pieceRight
14611854RZ – round cylinder70320x20x3rounded9, one-pieceLeft
14611853RZ – round cylinder70320x20x3rounded9, one-pieceRight
14611894RZ – round cylinder70320x24x3Square9, one-pieceLeft
14611893RZ – round cylinder70320x24x3Square9, one-pieceRight
14611816RZ – round cylinder80320x18x3rounded9, one-pieceLeft
14611815RZ – round cylinder80320x18x3rounded9, one-pieceRight
14611856RZ – round cylinder80320x20x3rounded9, one-pieceLeft
14611855RZ – round cylinder80320x20x3rounded9, one-pieceRight
14611896RZ – round cylinder80320x24x3Square9, one-pieceLeft
14611895RZ – round cylinder80320x24x3Square9, one-pieceRight
14611822PZ – profile cylinder30320x18x3rounded9, one-pieceLeft
14611821PZ – profile cylinder30320x18x3rounded9, one-pieceRight
14611862PZ – profile cylinder30320x20x3rounded9, one-pieceLeft
14611861PZ – profile cylinder30320x20x3rounded9, one-pieceRight
14611902PZ – profile cylinder30320x24x3Square9, one-pieceLeft
14611901PZ – profile cylinder30320x24x3Square9, one-pieceRight
14611824PZ – profile cylinder35320x18x3rounded9, one-pieceLeft
14611823PZ – profile cylinder35320x18x3rounded9, one-pieceRight
14611864PZ – profile cylinder35320x20x3rounded9, one-pieceLeft
14611863PZ – profile cylinder35320x20x3rounded9, one-pieceRight
14611904PZ – profile cylinder35320x24x3Square9, one-pieceLeft
14611903PZ – profile cylinder35320x24x3Square9, one-pieceRight
14611826PZ – profile cylinder40320x18x3rounded9, one-pieceLeft
14611825PZ – profile cylinder40320x18x3rounded9, one-pieceRight
14611866PZ – profile cylinder40320x20x3rounded9, one-pieceLeft
14611865PZ – profile cylinder40320x20x3rounded9, one-pieceRight
14611906PZ – profile cylinder40320x24x3Square9, one-pieceLeft
14611905PZ – profile cylinder40320x24x3Square9, one-pieceRight
14611832PZ – profile cylinder60320x18x3rounded9, one-pieceLeft
14611831PZ – profile cylinder60320x18x3rounded9, one-pieceRight
14611872PZ – profile cylinder60320x20x3rounded9, one-pieceLeft
14611871PZ – profile cylinder60320x20x3rounded9, one-pieceRight
14611912PZ – profile cylinder60320x24x3Square9, one-pieceLeft
14611911PZ – profile cylinder60320x24x3Square9, one-pieceRight
14611834PZ – profile cylinder70320x18x3rounded9, one-pieceLeft
14611833PZ – profile cylinder70320x18x3rounded9, one-pieceRight
14611874PZ – profile cylinder70320x20x3rounded9, one-pieceLeft
14611873PZ – profile cylinder70320x20x3rounded9, one-pieceRight
14611914PZ – profile cylinder70320x24x3Square9, one-pieceLeft
14611913PZ – profile cylinder70320x24x3Square9, one-pieceRight
14611836PZ – profile cylinder80320x18x3rounded9, one-pieceLeft
14611835PZ – profile cylinder80320x18x3rounded9, one-pieceRight
14611876PZ – profile cylinder80320x20x3rounded9, one-pieceLeft
14611875PZ – profile cylinder80320x20x3rounded9, one-pieceRight
14611916PZ – profile cylinder80320x24x3Square9, one-pieceLeft
14611915PZ – profile cylinder80320x24x3Square9, one-pieceRight
Accessories/Individual parts
 
Order number
Product
Base plate for U-shaped face plate
B-14421Base plate for U-shaped face plate
Panic passive leaf locking system
24473-HPanic passive leaf locking system
With contacts and automatic locking upwards and downwards, suitable for all double-leaf sFlipLock and mFlipLock locks in wooden doors.
Panic passive leaf locking system
24473-MPanic passive leaf locking system
With contacts, automatic locking upwards and downwards, suitable for all double-leaf sFlipLock and mFlipLock locks in metal doors.
Downloads for Product

General

Product sheet sFlipLock check panic security mortise lock 14574PE-SV-ZF (PDF)
Operating instructions (PDF, 8.80 MB)

Certificates and attests

Certificate of constancy of performance EN 179 (PDF, 400 KB)
Certificate of constancy of performance EN 1125 FlipLock (PDF, 397 KB)
Certificate of constancy of performance EN 12209 (PDF, 195 KB)

Drawings for Specification Documents

Downloads (DXF, 889 KB)

Medias

Product image (JPG, 185 KB)
Product image (EPS, 11.72 MB)
Technical drawing 1 (JPG, 393 KB)
Technical drawing 1 (EPS, 2.38 MB)
Technical drawing 2 (JPG, 395 KB)
Technical drawing 2 (EPS, 2.36 MB)
Technical drawing 3 (JPG, 390 KB)
Technical drawing 3 (EPS, 2.38 MB)