sFlipLock access, panic security mortise lock, motorised 15574PE-SV-ZF.7

Overview of Advantages

• Mounted motor unit with integrated motor control for the basic function (open/closed). With switched output if the lock is unlocked via the motor.
• Display of the open position and feedback to electric door drives
• Opening signal (GND) e.g. via fingerprint, button, switching timer, etc.
• Electrical interface RS 485, e.g. for direct communication via biometrics scanner and error log. Tampering protection opening impulse now only via BUS
• Evaluation of potential-free contacts (AWS):Door status (changeover contact), handle panic side (changeover contact), delayed bolt switch contact (changeover contact), bolt switch contact (changeover contact), cylinder contact
• Flip latch enables easy motorised unlocking, even if the door is warped
• Motorised opening in 1.5 seconds
• Low power consumption: 350mA at 24V DC
• Mechanical automatic locking system
• No
• Certification according to EN 1125
• Approved in accordance with EN 1634-1 to 3 with AWS
• Approved in accordance with EN 12209 Class 7
• Approved in accordance with EN 18251-2 Class 5
• Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

• Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened via an electronic impulse, fingerprint, button, badge or timer switch or with the key via the drawback from the outside. Emergency opening from the outside is possible at all times via the cylinder when the door is locked. The lock locks automatically again when the door closes (automatic locking).

Area of Application

• double-leaf full panic doors
• Access control and building management applications, incl. bus connection
• Public buildings, banks, prisons, hospitals
• Security, escape route and fire doors in commercial, public and industrial buildings

Note

• Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-15544 is required. Backset 45/50/65 on request. In combination with an evaluation control unit (AWS) (Art. no.14471401/02) and passive leaf locking system 24413 or 24473. Connecting cable and striking plates must be ordered separately.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Only for system partners with a training certificate