sFlipLock panic security mortise lock 14546PBa-SV-ZF

Overview of Advantages

• Flip latch with sound insulation
• Mechanical automatic locking
• Easy to open under pre-load
• Version with round cylinder or profile cylinder
• Backset: 30 - 80mm
• Round face plate in 18mm / 20mm width or square face plate 24mm
• Certification according to EN 1125
• Certification according to EN 1634-1 to 3
• Burglary resistant to class RC2 can be achieved in appropriate door systems

Product description

• With these mortise locks, a door handle, panic door fitting or a pushbar is mounted on the inside of the door. A door handle is also mounted on the outside of the door. In unlocked state, the door can be opened from both sides. In locked state, the door can not be opened from the outside, but can always be opened from the inside (panic function inwards opening), the long bolt is retracted and the flip latch is released at the same time. The lock locks automatically when the door closes (automatic locking). The spindle (follower) is split with panic function B. This panic function is suitable for doors that also have to be opened from the outside at specific times (daytime operation). Daytime operation can be activated via the cylinder, with a key turned in the direction of opening to the stop - the door handle is then engaged on the outside of the door

Area of Application

• double-leaf full panic doors
• Security doors, escape route and fire doors in the industrial field and public buildings, including in combination with electronic fittings like an actuating bar.

Note

• Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-14421 is required. In combination with the passive leaf locking system 24413 or 24473. The leaf locking system must be ordered separately. The backset 45/50/65 is only available on request.
• Use special profile half spindle MSL 5968