eBar 1.2, mechatronic, with emergency switch, 5983.1100

With potential-free contacts, display, RS485 interface, emergency switch

One-handed operation
With certified emergency switch (as opening contact for electric door locking systems)
Display field and daytime release function (TF)
Acoustic and optical pre-alarm and main alarm
With potential-free contacts for pre-alarm and main alarm, incl. installed half-cylinder
Can be shortened on one side
Changing the colour display red/green
Mains operation or battery operation
RS 485 data bus interface
With DIP switch
With integrated emergency switch
Certification according to EN 1125
Approved in accordance with EN 1634

With this version MSL eBar 1.2, access authorisations can be regulated by assigning a single release or permanent release, on-site or externally. The colour on the display can also be switched from red to green. The integrated data interface enables multiple eBar 1.2 and other products, e.g. Flip Lock – (AWS), to be networked. If the MSL eBar 1.2 is pressed just lightly, the backlit display pulsates (sequential light) red. An acoustic signal (95 dBA/1 m) sounds, which stops as soon as the MSL eBar 1.2 is released (pre-alarm). When the MSL eBar 1.2 is pressed fully, emergency opening is carried out on the door. The display also flashes green, a main alarm with 95 dBA is triggered. This main alarm continues both visually and acoustically until the alarm is acknowledged on the integrated key switch. Different functions can be controlled with the DIP switch via the DIP numbers.
Changing of the opening time: +6 /+12 seconds
Light setting for always open: dark/ pulsing
Acoustic alarm: off/on
Timer acoust. Alarm 3min: off/on
Door forced open monitoring: off/on
Alarm delay: active/inactive
Input dimming: pre-alarm/dimming