Panic security mortise lock with contacts and panic function E 14574PE-SV.7

Overview of Advantages

• Monitoring and feedback of the lock status
• Flip latch with sound insulation
• Mechanical automatic locking
• Easy to open under pre-load
• With latch-bolt function
• No
• Certification according to EN 1125
• Approved in accordance with EN 1634-1 to 3 Intrusion resistance up to Class RC2 achievable in suitable door systems

Product description

• These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key. The lock locks automatically when the door closes (automatic locking).

Area of Application

• For access control and monitoring in building management:
• Security doors, escape route and fire doors in commercial and public buildings
• Internal building area in combination with access components

Note

• Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-14421 is required. Backset 45/50/65 on request.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Connecting cable check must be ordered separately.
• Only for system partners with a training certificate