Panic security mortise lock with contacts and panic function E 14574PE-SV-TF.7

Overview of Advantages

• Monitoring and feedback of the lock statuslFlip latch with sound insultationlMechanical automatic lockinglMechanically activated daytime release functionlEasy opening under pre-loadlWith drawbacklCertification in accordance with EN 179lCertification in accordance with EN 1125lBurglary resistance up to class RC2 can be achieved in suitable door systems
• Tamper protection opening impulse now only via BUS
• Flip latches enable easy motorised unlocking, even with door warpage.

Product description

• These mortise locks are equipped with monitoring contacts. (Monitoring control latch status, door handle status, bolt status and cylinder status). These locks are also available equipped with a mechanically activated daytime release function (key rotation in locking direction to the stop in open state). This means that the doors can be passed through from both sides, because the flip latch is unlocked and acts like a roller keep. If daytime release function is switched off, (key rotation in opening direction in open state), the lock locks automatically when the door is closed (automatic locking). Exit through the locked door is possible at any time via the inside handle, panic bar or a pushbar. These pull the long bolt back and also unlock the flip latch (panic function). A knob or handle bar is mounted on the outside. The door can be opened from the outside via the drawback with the key

Area of Application

• New construction and renovation
• Internal building areas
• In security doors and escape route doors

Note

• Suitable for freewheeling cylinders, not suitable for external bolt switch contacts. For the U-shaped version, the accessory shim B-14421 is required. Backset 45/50/65 on request.
• Round rosettes (cross-screwed) only from backset 45 mm.
• Connecting cable check must be ordered separately.
• Only for system partners with a training certificate