CLIQ Local Manager Remote
Please note the system requirements (47.9 KB) in advance.
Furthermore, the order of commissioning according to the QuickGuide (95.1 KB) (enclosed with the controller) must be observed. It is particularly important that the controller is first connected to the network and then to the power supply.
Status as of: 27.07.2023 / SBB
No, CLIQ Connect keys cannot be used with CLIQ Local Manager with Remote. These keys have an integrated Bluetooth module and are suitable for use with CLIQ Web Manager and CLIQ Go. They connect to a server to retrieve information for the key.
CLIQ Local Manager is an offline software.
Status as of: 27.07.2023 / SBB
The setting works in 15min steps and applies to all E2 and E3 keys of the locking system.
Afterwards, individual keys can be removed from the validation.
You can see the application in the following video:
Status as of: 27.07.2023 / SBB
All programming jobs are stored in the controller. This means that when the controller is offline, no authorisation changes or validity extensions can be made.
There is no offline validation as with the CLIQ Web Manager.
Status as of: 27.07.2023 / SBB
You order another wall programming device to import and configure in the locking system.
If there are already three wall devices in the software, the defective device must be set to inactive in CLIQ Local Manager before importing the new locking system data (.els file). Afterwards, the new device can be imported and put into operation.
Status as of: 27.07.2023 / SBB