Electric strike 14RR--------D11
Without strike plate, 6-12 V AC/DC
Product description
Model with monitoring contact as potential-free changeover contact. This is actuated by the latch bolt via a lever.
Overview of Advantages
- Suitable for all common striking plates
- Can be combined with striking plates with latch guide (model St.)
- Reversible design = DIN right (DR=5)
Scope of delivery
- 1 piece electric strike
Note
- Order code for version DIN right = 14ARR
| DIN direction | universal |
| Electric strike voltage | 6-12 V AC/DC |
| Monitoring contact (RR) | Yes |
| Fail-locked | Yes |
| Contact load capacity | 1 A |
| Rated resistance | 7.7 Ohm |
| Current consumption 12 V AC | 1100 mA |
| Current consumption 6 V AC | 550 mA |
| Current consumption DC (50% Residual ripple) 12 V | 1480 mA |
| Current consumption DC (50% Residual ripple) 6 V | 740 mA |
| Current consumption 12 V DC (stabilised) | 1560 mA |
| Current consumption 6 V DC (stabilised) | 780 mA |
| Break-in resistance | 5000 N |
| Height | 120 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical and horizontal |
| Material housing | Zinc die-cast |
| Latch material | Steel |
| Max. preload 6 V AC | 160 N |
| Max. preload 12 V AC | 160 N |
| Max. latch preload DC (50% ripple) 6 V | 40 N |
| Max. latch preload DC (50% ripple) 12 V | 100 N |
| Max. preload 6 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 60 N |