Electric strike 14SFF-------R15
Without face plate, 8-16 V AC/DC
Product description
Model with reversible design. The advantage of this design is that the connection also points upwards in the DIN right version. This means the cable conduit is not placed near the deadbolt. Adjustable FaFix® latch which features keeper alignment.
Overview of Advantages
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN direction | Right |
| Electric strike voltage | 8-16 V AC/DC |
| Adjustable keeper (FF, FaFix®) | Yes |
| Fail-locked | Yes |
| Rated resistance | 16.5 Ohm |
| Current consumption 12 V AC | 500 mA |
| Current consumption AC 16 V | 700 mA |
| Current consumption AC 8 V | 350 mA |
| Current consumption DC (50% Residual ripple) 12 V | 710 mA |
| Current consumption DC (50% Residual ripple) 16 V | 940 mA |
| Current consumption DC (50% Residual ripple) 8 V | 470 mA |
| Current consumption 12 V DC (stabilised) | 725 mA |
| Current consumption DC (stabilized) 16 V | 970 mA |
| Current consumption DC (stabilized) 8 V | 485 mA |
| Break-in resistance | 4000 N |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Zinc die-cast |
| Material screw-on attachment | Zinc die-cast |
| Max. Preload 8 V AC | 110 N |
| Max. preload 12 V AC | 80 N |
| Max. preload 16 V AC | 100 N |
| Max. keep pre-load DC (50% Residual ripple) 8 V | 10 N |
| Max. latch preload DC (50% ripple) 12 V | 20 N |
| Max. latch preload DC (50% ripple) 16 V | 40 N |
| Max. preload 8 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 10 N |
| Max. preload 16 V DC (stabilised) | 20 N |