Electric strike 14ESF-------D14
Without strike plate, 6-12 V AC/DC
Product description
Model with reversible design. The advantage lies in the fact that the connection also points upwards in the DIN right version. This means the cable conduit is not near the deadbolt. With mechanical permanent unlocking in keeper. Adjustable FaFix latch which enables door strike latch to be aligned.
Overview of Advantages
- The universal strike in a solid design
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN direction | Left |
| Electric strike voltage | 6-12 V AC/DC |
| Adjustable electric strike (F, Fix®) | Yes |
| Mechanical unlocking (E) | Yes |
| Fail-locked | Yes |
| Rated resistance | 7.7 Ohm |
| Current consumption 12 V AC | 1100 mA |
| Current consumption 6 V AC | 550 mA |
| Current consumption DC (50% Residual ripple) 12 V | 1480 mA |
| Current consumption DC (50% Residual ripple) 6 V | 740 mA |
| Current consumption 12 V DC (stabilised) | 1560 mA |
| Current consumption 6 V DC (stabilised) | 780 mA |
| Break-in resistance | 6500 N |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Zinc die-cast |
| Max. latch preload AC | 160 N |
| Max. latch preload DC (50% ripple) 6 V | 40 N |
| Max. latch preload DC (50% ripple) 12 V | 100 N |
| Max. preload 6 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 60 N |