Electric strike 1405SFF-----F35
Without striking plate, 24 V DC electric unlocking
Product description
Model with recovery diode for access control systems, with reversible design. The advantage lies in the fact that the connection also points upwards in the DIN right version. This means the cable conduit is not near the deadbolt. Adjustable FaFix latch which enables keeper to be aligned.
Overview of Advantages
- The universal strike in a solid design
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN direction | Right |
| Electric strike voltage | 24 V DC eE |
| Adjustable keeper (FF, FaFix®) | Yes |
| Diode (05) | Yes |
| Fail-locked | Yes |
| Rated operating voltage tolerance range | ± 2 V |
| Rated resistance | 235 Ohm |
| current consumption | 70 mA |
| Current consumption DC (50% Residual ripple) | 100 mA |
| DC-power consumption (stabilised) | 102 mA |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Zinc die-cast |
| Material screw-on attachment | Zinc die-cast |
| Break-in resistance | 4000 N |
| Max. latch preload AC | 80 N |
| Max. keeper pre-load DC (50% residual ripple) | 35 N |
| Max. latch preload DC (stabilised) | 25 N |