Electric strike 19E.240-----E31
Without striking plate, 12 V DC electric unlocking
Product description
model with mechanical permanent unlocking of the keeper as well as bigger screw-on attachment
Overview of Advantages
- Due to 180° fitting, can be used DIN right and left
- A range of different slim-fit striking plates are available
- If model 19 is combined with DIN direction 4 (position 15), the correct fitting position for the long part of the casing is upwards
| DIN-direction | universal |
| 12 V DC eE | |
| Adjustable keeper (FF, FaFix®) | Yes |
| Mechanical unlocking (E) | Yes |
| Fail-locked | Yes |
| Rated operating voltage tolerance range | ± 1 V |
| Rated resistance | 60 Ohm |
| current consumption | 130 mA |
| Current consumption DC (50% Residual ripple) | 190 mA |
| DC-power consumption (stabilised) | 200 mA |
| Break-in resistance | 3000 N |
| Height | 90 mm |
| Operating temperature range | -15 °C to +40 °C |
| Material housing | Zinc die-cast |
| Material screw-on attachment | Brass |
| Width | 16.5 mm |
| Depth | 28 mm |
| Max. latch preload AC | 80 N |
| Max. keeper pre-load DC (50% residual ripple) | 20 N |
| Max. latch preload DC (stabilised) | 10 N |