Electric strike 143.20------Q35

Without strike plate, 12/24 V AC/DC eE, DIN right

  • ArtNo: 143.20------Q35
  • EAN: 4042203461116

Product description

Model with monitoring contact as potential-free changeover contact. This is actuated by the latch bolt via a lever.

Can also be used as a high-security strike

Overview of Advantages

  • Radius keeper, FaFix®, adjustable by 2 mm
  • New connection technology, can be replugged
  • 12-24 Volt voltage range for AC and DC operation
  • Resistant to continuous current across the entire voltage range
  • All models can be fitted as required (right/left/horizontally)
  • Integrated surpressor diode
  • Compatible with ProFix® 1 striking plates
  • Preload modes 400N or 800N can be set

Note

  • Each version can be installed on the left, right, or horizontally. If space is limited, the terminal block can be fitted elsewhere on site.
Technical data
DIN directionRight
Electric strike voltage12 - 24 V AC/DC eE
Adjustable keeper (FF, FaFix®)Yes
Monitoring contact (RR)Yes
Fail-lockedYes
TVS diodeYes
Changeable connectionYes
Input operating voltage12/24 V
Input operating voltage tolerance range 12 V± 1 V
Input operating voltage tolerance range 24 V± 2 V
Max. start current consumption at 12 V DC500 mA
Max. start current consumption at 24 V DC250 mA
Switching capacity - monitoring contact24 V / 1 A
Current consumption 12 V AC/DC165 mA
Current consumption 24 V AC/DC80 mA
Max. pre-load400 N / 800 N
Break-in resistance8000 N
Height79 mm
Width28 mm
Depth28 mm
FaFix® adjustment range2 mm
Latch bolt engaging depth6 mm
Operating temperature range-15 °C to +40 °C
Continuous function load cycles200000
Load cycles for in-plant test500000
Installation positionVertical and horizontal
Suitable for fire doorsYes
Recovery diodeYes
Certified in compliance withDIN EN 14846:2008
VdS classClass B
Max. latch preload AC400 N
Max. latch preload DC (stabilised)400 N