Electric strike 142URF------Q35
Without strike plate, 12/24 V AC/DC eE, DIN right
Product description
Model with monitoring contact as potential-free changeover contact. This is actuated by the latch bolt via a lever.
Overview of Advantages
- High break-in resistance
- Monitoring contact
- Can switch between 12 and 24 V for AC and DC operation
- Vertical and horizontal fitting possible
- Integrated surpressor diode
Scope of delivery
- 1 piece electric strike
Note
- DIN right models and S models can be fitted for use in locks with minimum latch bolt spacing and also offer the possibility of directing the connecting cable away to a suitable position.
| DIN-direction | Right |
| 12 - 24 V AC/DC eE | |
| Adjustable electric strike (F, Fix®) | Yes |
| Monitoring contact (RR) | Yes |
| Fail-locked | Yes |
| TVS diode | Yes |
| Input operating voltage tolerance range 12 V | ± 1 V |
| Input operating voltage tolerance range 24 V | ± 2 V |
| Contact load capacity | 1 A |
| Nominal resistance 12 V | 58 Ohm |
| Nominal resistance 24 V | 230 Ohm |
| Current consumption 12 V AC | 130 mA |
| Current consumption 24 V AC | 70 mA |
| Current consumption DC (50% Residual ripple) 12 V | 190 mA |
| Current consumption DC (50% ripple) 24 V | 100 mA |
| Current consumption 12 V DC (stabilised) | 210 mA |
| Current consumption 24 V DC (stabilised) | 105 mA |
| Break-in resistance | 10000 N |
| Height | 103 mm |
| Width | 21 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical and horizontal |
| Certified in compliance with | EN 14846:2008 |
| Max. preload 12 V AC | 50 N |
| Max. preload 24 V AC | 50 N |
| Max. latch preload DC (50% ripple) 12 V | 20 N |
| Max. latch preload DC (50% ripple) 24 V | 20 N |
| Max. preload 12 V DC (stabilised) | 10 N |
| Max. preload 24 V DC (stabilised) | 10 N |