Electric strike 914ZY-----02D15
6-12 V AC/DC, DIN right
Product description
Electric strike for glass doors with frame. The housing has a profile cylinder hole to enable emergency unlocking with a mechanical key in the event of a power failure. Due to the adjustable keeper, the glass door strike can be adjusted to the glass thickness. In the case of double-leaf all-glass doors, an electric strike must be installed in the door frame at the top for each leaf (not suitable for double acting swing doors). Models 914ZY are fastened with a safety bolt to ensure that the keeper is not fixed unintentionally when the door is open.
Overview of Advantages
- Fail-locked (unlocked when energised)
- Vertical and horizontal mounting possible
- Adjustable to glass leaf thickness 9-12 mm (FaFix®)
- With safety pin to prevent unintentional locking of the keeper
Scope of delivery
- 1 electric strike with strike plate and profile cylinder housing, colour grey
| DIN direction | Right |
| Adjustable keeper (FF, FaFix®) | Yes |
| Fail-locked | Yes |
| Input operating voltage tolerance range 6 V | wie angegeben |
| Input operating voltage tolerance range 12 V | wie angegeben |
| Rated resistance | 7.7 Ohm |
| Nominal resistance 12 V | 8 Ohm |
| Rated resistance 6 V | 8 Ohm |
| current consumption | 550 mA |
| Current consumption 12 V AC | 1100 mA |
| Current consumption 6 V AC | 550 mA |
| Current consumption DC (50% Residual ripple) | 740 mA |
| Current consumption DC (50% Residual ripple) 12 V | 1480 mA |
| Current consumption DC (50% Residual ripple) 6 V | 740 mA |
| DC-power consumption (stabilised) | 780 mA |
| Current consumption 12 V DC (stabilised) | 1560 mA |
| Current consumption 6 V DC (stabilised) | 780 mA |
| Glas door thickness | 9-12 mm |
| Break-in resistance | 3700 N |
| Height | 167 mm |
| Width | 24 mm |
| Depth | 31 mm |
| Operating temperature range | -15 °C to +40 °C |
| Max. preload 6 V AC | 60 N |
| Max. preload 12 V AC | 90 N |
| Max. latch preload DC (50% ripple) 6 V | 10 N |
| Max. latch preload DC (50% ripple) 12 V | 20 N |
| Max. preload 6 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 10 N |
| Max. latch preload AC | 60 N |
| Max. keeper pre-load DC (50% residual ripple) | 10 N |
| Max. latch preload DC (stabilised) | 10 N |