Locking lever cylinder eCLIQ NT01

19 mm Diameter, laterally flattened to 16 mm -without key, without locking lever-

Product description

  • Power is supplied exclusively via the key (no battery in the cylinder)
  • Ideal for application in letter boxes, lockers and metal cabinets with cylinder lever locks
  • Available as rotary secured or electronical version (V=)
  • Standard with core output for mounting of locking levers (ABTR=M10S8)
  • Optionally available with additional core outputs (ABTR=)
  • Brass cylinder housing components
  • Matt nickel-plated surface (OF=MV)
  • Fixing with M19 x 1 x 5 housing nut
  • Standard locking path and locking lever path 90º left or right (AUS=0) Key withdrawal at 0°
  • Optionally locking path and locking lever path 180º left or right (AUS=180) Key withdrawal at 0° and 180°
  • Maintenance-free for up to 200,000 cycles
  • Dust and rain cover available (SUR=1) IP55
  • Optionally available for use in potentially-explosive atmospheres in Zone 1 (ATEX=II 2G Ex ib IIC T4 Gb)

Scope of delivery

  • 1 locking lever cylinder - without locking lever
  • 1 housing nut M19 x 1 x 5
  • 1 core nut, M7 x 1 (for core output M7V05 and M7S6,) or M10 x 1 (for core output M10S8)

Note

  • Please order locking levers and other additional parts separately - Part No. NTS1
Variants that can be ordered
Article numberOF=V=
NT01 MV D
MV E
Special equipment

Special identification marking

DescriptionInfo
Special designation of your choice for the front of profile cylinders, 6 characters maximum (SBZ=)per cylinder

Explosion protection

ATEX=DescriptionInfo
II 2G Ex ib IIC T4 GbLocking cylinders for Zone 1 hazardous areasper cylinder

Special finish

OF=Area of applicationInfo
MC For profile and locking lever cylindersMatt, chrome plated

Dust and rain protection

SUR=Area of applicationInfo
1For special cylindersper cylinder

Version

AUS3=DescriptionInfo
ONLINECylinder with function "Online Open", frontal marking with symbol "@"per cylinder
SEQUENCECylinder with function "two-man rule", frontal marking with symbol "&"per cylinder

Core output

ABTR=DescriptionInfoArea of application
M10S8Cylinder with downforce thread M10 laterally flattened 8x8 mmper cylinderFor locking lever cylinder NT01 and NT02
M7V05Cylinder with downforce thread M7 vertically flattened 5 mmper cylinderFor locking lever cylinder NT01 and NT02
M7S68Cylinder with downforce thread M7 laterally flattened 6.8x6.8 mmper cylinderFor locking lever cylinder NT01 and NT02