Universal locking lever cylinder .211

Overview of Advantages

• If necessary, the locking direction can however be easily changed by changing the position of the stop screw.

Product description

• Brass cylinder matt chrome-plated
• Number of pin tumblers dependent on system
• Standard finish, matt chrome-plated (OF=MC)
• Blocking wave (SW=), additional lateral scanning and security card depending on profile (PR=)
• Spherical / Tapered cylinder core head with reinforced key guide
• Core pins made of special wear-resistant bronze
• Locking path and locking lever path 90º left or right
• Key withdrawal when locking lever is closed
• Fixing with housing nut M23 x 0.75
• Standard locking lever (SLHB=1645009)
• Dimension a, b, c, d in mm dependend on system (L=)

Scope of delivery

• 1 locking lever cylinder
• 2 nickel silver keys
• 1 casing screw nut M23 x 0.75
• 1 core nut, M10 x 0,75 x 3

Ordering Information

• Please include the desired locking path (SST=) in your order.
• Cylinder lenght L= is necessary in your order for measurements a,b,c,d with L=25 (25, 35, 21, 16) or L=29 (29, 39, 25, 20).
• The actual lengths for a and b can deviate by +0.5 mm.
• For article H211, locking levers that differ from the standard (SLHB=1645009) must be ordered separately using article 1905. Locking levers in the RW6 system are generally not pre-assembled.