Electric strike 14S---------R15
Product description
Model with reversible design. The advantage lies in the fact that the connection also points upwards in the DIN-right version. This means the cable conduit is not near the deadbolt.
Overview of Advantages
- The minimum gap between the strike latch and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
Product image
| DIN-direction | Right |
| potential | 8-16 V AC/DC |
| Fail-locked | Yes |
| Rated resistance | 16,5 Ohm |
| Current consumption AC 12 V | 500 mA |
| Current consumption AC 16 V | 700 mA |
| Current consumption AC 8 V | 350 mA |
| Current consumption DC (50% Residual ripple) 12 V | 710 mA |
| Current consumption DC (50% Residual ripple) 16 V | 940 mA |
| Current consumption DC (50% Residual ripple) 8 V | 470 mA |
| Current consumption DC (stabilized) 12 V | 725 mA |
| Current consumption DC (stabilized) 16 V | 970 mA |
| Current consumption DC (stabilized) 8 V | 485 mA |
| Break-in resistance | 6500 N |
| Height | 90 mm |
| Width | 20,5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Steel |
| Max. latch preload AC operation 8 V | 110 N |
| Max. latch preload AC operation 12 V | 80 N |
| Max. latch preload AC operation 16 V | 100 N |
| Max. keep pre-load DC (50% Residual ripple) 8 V | 10 N |
| Max. latch preload DC (50% ripple) 12 V | 20 N |
| Max. latch preload DC (50% ripple) 16 V | 40 N |
| Max. latch preload DC (stabilised) 8 V | 10 N |
| Max. latch preload DC (stabilised) 12 V | 10 N |
| Max. latch preload DC (stabilised) 16 V | 20 N |