Electric strike 24SFF-------F35
Product description
Model with reversible design. The advantage of this design is that the connection also points upwards in the DIN right-hand version. This means the cable conduit is not placed near the deadbolt. Adjustable FaFix® latch which features electric strike latch alignment.
Overview of Advantages
- The universal strike in a solid design
- The minimum gap between the strike latch and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
Product image
| DIN-direction | Right |
| potential | 24 V DC eE |
| Adjustable keeper (FF, FaFix®) | Yes |
| Fail-locked | Yes |
| Hold-open function | Yes |
| Rated operating voltage tolerance range | ± 2 V |
| Rated resistance | 235 Ohm |
| current consumption | 70 mA |
| Current consumption DC (50% Residual ripple) | 100 mA |
| Current consumption DC (stabilised) | 102 mA |
| Break-in resistance | 4000 N |
| Height | 104 mm |
| Width | 20,5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Material housing | Zinc die-cast |
| Latch material | Zinc die-cast |
| Material surface-mounted attachment | Zinc die-cast |
| Max. latch preload AC | 80 N |
| Max. keeper pre-load DC (50% residual ripple) | 35 N |
| Max. latch preload DC (stabilised) | 25 N |