Sonderprofilhalbzylinder ..32,VAR2=2MM
Produktbeschreibung
- Zylinder Messing
- Standard Oberfläche matt vernickelt (OF=MV)
- Anzahl der Stiftzuhaltungen und Zylindergrundlänge (L=) entsprechend dem jeweiligen System
- Standard Schließbartstellung 45° links unten - 8x45° umlegbar (SST=8x45)
- Anbohrschutz (AB=), Sicherungskarte je nach Profil (PR=)
- Kegeliger Zylinderkernkopf mit verstärkter Schlüsselführung
- Schließbart aus bruchfestem, korrosionsbeständigem Sintermetall
- Kernstifte aus verschleißfester Sonderbronze
Lieferumfang
- 1 Profil-Halbzylinder
- 3 Neusilberschlüssel
- 1 Stulpschraube M5 x 85 mm
Hinweis
- Das Maß von der Mitte der Stulpschraube bis zur Zylinderrückseite ist 2 mm kürzer als bei P032, Schließbartradius 15 mm
In der von Ihnen ausgewählten Kombination gibt es keine verfügbaren Profilausführungen.
System | P0 | P5 | P6 | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelnummer | P032,VAR2=2MM | P532,VAR2=2MM | P632,VAR2=2MM | |||||||||||||
Systemgrundlänge | L= 30 mm | L= 30 mm | L= 30 mm | |||||||||||||
Anlagenart (AA=) | GH | H | KHZ | Z | ZUE | GH | H | KHZ | Z | ZUE | GH | H | KHZ | Z | ZUE | |
Profilobergruppe= | PA= | |||||||||||||||
Standard-Profil | 00 | |||||||||||||||
Spezial-Profil | 02 | |||||||||||||||
Sperr-Rippen-Profil | 03 | |||||||||||||||
Sperr-Rippe / Labyrinth-Profil | 04 | |||||||||||||||
Meander-Profil | 05 | |||||||||||||||
Meander-Rippe-Profil | 06 | |||||||||||||||
Meander-Rippe / Labyrinth-Profil | 07 | |||||||||||||||
Standard-Sperrwelle-Profil | 08 | |||||||||||||||
Spezial-Sperrwelle-Profil | 09 | |||||||||||||||
Schräg-Profil | 10 | |||||||||||||||
Sperrwelle Undercut | 11 | |||||||||||||||
Schräg-Profil / ZSE | 12 | |||||||||||||||
Schräg-Profil / ZSV | 13 | |||||||||||||||
Multiprofil | 14 | |||||||||||||||
Vector Service Profil VSP | 15 | |||||||||||||||
Vector-Profil 1. Sicherheitsstufe | 15 | |||||||||||||||
Vector-Profil 2. Sicherheitsstufe | 16 | |||||||||||||||
Wendeschlüsselprofil Sperrwelle | 18 | |||||||||||||||
Sperrwelle Undercut Extra Code | 19 | |||||||||||||||
Multiprofil plus | 22 | |||||||||||||||
Vectorprofil Rippe | 25 | |||||||||||||||
Vectorprofil Rippe Extra | 26 | |||||||||||||||
Arcus-Profil | 30 | |||||||||||||||
X-Profil | 32 | |||||||||||||||
ZR-Profil | 33 | |||||||||||||||
R-Profil | 34 |
System | P0 | |
---|---|---|
Artikelnummer | P032,VAR2=2MM | |
Systemgrundlänge | L= 30 mm | |
Profil (PR=) | PA= | |
Standardprofil N2 | 61 | |
Wendeschlüsselprofil W10 | 67 | |
Standardprofil AEP10 | 71 | |
ABLOY PROTEC² | 83 | |
Sperrwellenprofil 5PE | 85 | |
Wendeschlüsselprofil RW6 | 86 | |
Wendeschlüsselprofil RW6 - Händlerprofil | 87 | |
Radienprofil N6 | 88 | |
Sperr-Rippe Radienprofil 1RP06 | 90 | |
Sperr-Nocken-Radienprofil ...NP | 91 | |
Dreieckprofil DP06 | 92 |
System | P0 | |
---|---|---|
Artikelnummer | P032,VAR2=2MM | |
Systemgrundlänge | L= 30 mm | |
Profil (PR=) | PA= | |
Standardprofil N3. | 50 | |
Sperr-Nocke Schräg ..RS (0RS- 16RS) | 52 | |
Sperr-Rippe 1RP2. | 53 | |
Sperrwellenprofil 2PE | 54 | |
Sperr-Nocke ..RN | 58 | |
Sperr-Rippe/Labyrinth 1RP5. | 59 | |
Schrägprofil SP.. | 60 | |
Standardprofil SN. | 62 | |
Standardprofil N1. | 63 | |
Standardprofil DR. | 64 | |
Sperr-Nocke Schräg ..RS (ab 34RS) | 66 | |
Sperr-Rippe 1RP4. | 68 | |
Sperr-Rippe 1RP6. | 69 | |
Standardprofil N1P0 | 70 | |
Sperr-Nockenprofil Vector ...NP | 72 | |
Standardprofil N4. | 73 | |
Standardprofil SP3. | 74 | |
Sperr-Rippe 1RP3. | 75 | |
Sperr-Rippe Vector 1RP04 | 76 | |
Flachprofil Vector FP04 | 79 | |
Wendeschlüsselprofil RWS | 81 | |
Wendeschlüsselprofil Sperrwelle 2RWS | 82 |
| Bestellnummer | Produkt |
---|---|---|
8511 | Pflegespray |