Electric strike 14ES--------R15
Without face plate, 8-16 V AC/DC
Product description
Model with reversible design. The advantage lies in the fact that the connection also points upwards in the DIN right version. This means the cable conduit is not near the dead bolt. With mechanical unlocking (daytime unlocking).
Overview of Advantages
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN direction | Right |
| Electric strike voltage | 8-16 V AC/DC |
| Mechanical unlocking (E) | Yes |
| Fail-locked | Yes |
| Rated resistance | 16.5 Ohm |
| Current consumption 12 V AC | 500 mA |
| Current consumption AC 16 V | 700 mA |
| Current consumption AC 8 V | 350 mA |
| Current consumption DC (50% Residual ripple) 12 V | 725 mA |
| Current consumption DC (50% Residual ripple) 16 V | 970 mA |
| Current consumption DC (50% Residual ripple) 8 V | 485 mA |
| Current consumption 12 V DC (stabilised) | 710 mA |
| Current consumption DC (stabilized) 16 V | 940 mA |
| Current consumption DC (stabilized) 8 V | 470 mA |
| Break-in resistance | 6500 N |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Steel |
| Max. Preload 8 V AC | 110 N |
| Max. preload 12 V AC | 80 N |
| Max. preload 16 V AC | 100 N |
| Max. keep pre-load DC (50% Residual ripple) 8 V | 10 N |
| Max. latch preload DC (50% ripple) 12 V | 20 N |
| Max. latch preload DC (50% ripple) 16 V | 40 N |
| Max. preload 8 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 10 N |
| Max. preload 16 V DC (stabilised) | 20 N |