Electric strike 1405S-------E35
Without striking plate, 12 V DC electric unlocking
Product description
Model with recovery diode for access control systems with reversible design. The advantage lies in the fact that the connection also points upwards in the DIN right version. This means the cable conduit is not near the deadbolt.
Overview of Advantages
- The universal strike in a solid design
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN direction | Right |
| Diode (05) | Yes |
| Fail-locked | Yes |
| Rated operating voltage tolerance range | ±1 V |
| Rated resistance | 60 Ohm |
| current consumption | 125 mA |
| Current consumption DC (50% Residual ripple) | 190 mA |
| DC-power consumption (stabilised) | 200 mA |
| Break-in resistance | 6500 N |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Installation position | Vertical |
| Material housing | Zinc die-cast |
| Latch material | Steel |
| Max. latch preload AC | 100 N |
| Max. keeper pre-load DC (50% residual ripple) | 50 N |
| Max. latch preload DC (stabilised) | 40 N |