Electric strike 24SFF-------D15
Without strike plate, 6-12 V AC/DC
Product description
Model with reversible design. The advantage of this design is that the connection also points upwards in the DIN right version. This means the cable conduit is not placed near the deadbolt. Adjustable FaFix® latch which features keeper alignment.
Overview of Advantages
- The universal strike in a solid design
- The minimum gap between the keeper and casing lower surface enables DL and DR designs to be combined with locks which contain a minimum latch deadbolt clearance.
- For striking plates with minimum latch deadbolt clearance
- Suitable for all common striking plates
- Can be combined with striking plates with latch bolt guide (standard) without FaFix®
Scope of delivery
- 1 piece electric strike
| DIN-direction | Right |
| 6-12 V AC/DC | |
| Adjustable keeper (FF, FaFix®) | Yes |
| Fail-locked | Yes |
| Hold-open function | Yes |
| Rated resistance | 7.7 Ohm |
| Current consumption 12 V AC | 1100 mA |
| Current consumption 6 V AC | 550 mA |
| Current consumption DC (50% Residual ripple) 12 V | 1480 mA |
| Current consumption DC (50% Residual ripple) 6 V | 740 mA |
| Current consumption 12 V DC (stabilised) | 1560 mA |
| Current consumption 6 V DC (stabilised) | 780 mA |
| Break-in resistance | 4000 N |
| Height | 104 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Material housing | Zinc die-cast |
| Latch material | Zinc die-cast |
| Material screw-on attachment | Zinc die-cast |
| Max. latch preload AC | 160 N |
| Max. latch preload DC (50% ripple) 6 V | 40 N |
| Max. latch preload DC (50% ripple) 12 V | 100 N |
| Max. preload 6 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 60 N |