Electric strike 17----------R11
Without face plate, 8-16 V AC/DC
Product description
Model with basic equipment.
Overview of Advantages
- Suitable for all common striking plates
- Due to 180° fitting, can be used DIN right and left
- Symmetrical design
Scope of delivery
- 1 piece electric strike
| DIN direction | universal |
| Electric strike voltage | 8-16 V AC/DC |
| Adjustable keeper (FF, FaFix®) | Yes |
| Fail-locked | Yes |
| Nominal resistance 12 V | 22 Ohm |
| Rated resistance 16 V | 22 Ohm |
| Rated resistance 8 V | 22 Ohm |
| Current consumption 12 V AC | 470 mA |
| Current consumption AC 16 V | 620 mA |
| Current consumption AC 8 V | 310 mA |
| Current consumption DC (50% Residual ripple) 12 V | 520 mA |
| Current consumption DC (50% Residual ripple) 16 V | 185 mA |
| Current consumption DC (50% Residual ripple) 8 V | 350 mA |
| Current consumption 12 V DC (stabilised) | 550 mA |
| Current consumption DC (stabilized) 16 V | 730 mA |
| Current consumption DC (stabilized) 8 V | 360 mA |
| Installation position | Vertical and horizontal |
| Break-in resistance | 3500 N |
| Height | 75 mm |
| Width | 20.5 mm |
| Depth | 28 mm |
| Operating temperature range | -15 °C to +40 °C |
| Max. Preload 8 V AC | 60 N |
| Max. preload 12 V AC | 150 N |
| Max. preload 16 V AC | 150 N |
| Max. keep pre-load DC (50% Residual ripple) 8 V | 80 N |
| Max. latch preload DC (50% ripple) 12 V | 50 N |
| Max. latch preload DC (50% ripple) 16 V | 50 N |
| Max. preload 8 V DC (stabilised) | 10 N |
| Max. preload 12 V DC (stabilised) | 10 N |
| Max. preload 16 V DC (stabilised) | 10 N |