Electric strike 914ZY-----02E34
12 V DC eE, DIN left
Product description
Electric strike for glass doors with frame. The housing has a profile cylinder hole to enable emergency unlocking with a mechanical key in the event of a power failure. Due to the adjustable keeper, the glass door strike can be adjusted to the glass thickness. In the case of double-leaf all-glass doors, an electric strike must be installed in the door frame at the top for each leaf (not suitable for double acting swing doors). Models 914ZY are fastened with a safety bolt to ensure that the keeper is not fixed unintentionally when the door is open.
Overview of Advantages
- Fail-locked (unlocked when energised)
- Vertical and horizontal mounting possible
- Adjustable to glass leaf thickness 9-12 mm (FaFix®)
- With safety pin to prevent unintentional locking of the keeper
Scope of delivery
- 1 electric strike with strike plate and profile cylinder housing, colour grey
DIN-direction | Left |
Adjustable keeper (FF, FaFix®) | Yes |
Fail-locked | Yes |
Rated operating voltage tolerance range | ± 1 V |
Rated resistance | 60 Ohm |
current consumption | 130 mA |
Current consumption DC (50% Residual ripple) | 190 mA |
DC-power consumption (stabilised) | 200 mA |
Glas door thickness | 9-12 mm |
Break-in resistance | 3700 N |
Height | 167 mm |
Width | 24 mm |
Depth | 31 mm |
Operating temperature range | -15 °C to +40 °C |
Max. latch preload AC | 20 N |
Max. keeper pre-load DC (50% residual ripple) | 10 N |
Max. latch preload DC (stabilised) | 10 N |