Glass door strike 934U-09-----Q91
Without striking plate, 12/24V AC/DC
Product description
When the door is closed, the keeper with fixing plate holds the door leaf in place at the same time.
The door must have a stop for the door leaf or be actuated by a door closer with adjustable closing force. In the case of two-leaf glass doors, a strike must be integrated at the top in the door frame for each leaf (not suitable for swing doors).
Models 914 and 914ZY are fastened with a securing pin to ensure that the keeper is not locked unintentionally when the door is open.
The adjustable keeper enables exact adjustment of the glass door strike to suit the glass thickness involved.
Overview of Advantages
- DIN left and right usable
- Vertical and horizontal mounting possible
- Fail-locked and fail-unlocked version
- With 12/24 V changeover switch including TVS diode (e.g. to combine with access control systems)
- Adjustment to glass leaf thickness
- Model 914U with securing pin against unintentional locking of the keeper
Scope of delivery
- 1 glass door strike
DIN-direction | universal |
12-24 V DC | |
Adjustable keeper (FF, FaFix®) | Yes |
Adjustable electric strike (F, Fix®) | Yes |
Diode (05) | Yes |
Fail-unlocked | Yes |
Rated operating voltage tolerance range | ± 1 V (12V) |
Input operating voltage tolerance range 12 V | ± 1 V |
Input operating voltage tolerance range 24 V | ± 2 V |
Nominal resistance 12 V | 58 Ohm |
Nominal resistance 24 V | 230 Ohm |
Current consumption 12 V AC | 130 mA |
Current consumption 24 V AC | 70 mA |
Current consumption DC (50% Residual ripple) 12 V | 190 mA |
Current consumption DC (50% ripple) 24 V | 100 mA |
Current consumption 12 V DC (stabilised) | 210 mA |
Current consumption 24 V DC (stabilised) | 105 mA |
Glas door thickness | 9-12 mm |
Break-in resistance | 3700 N |
Height | 102.3 mm |
Width | 21 mm |
Depth | 28 mm |
Operating temperature range | -15 °C to +40 °C |
Installation position | Vertical and horizontal |
Max. preload 12 V AC | 50 N |
Max. preload 24 V AC | 50 N |
Max. latch preload DC (50% ripple) 12 V | 10 N |
Max. latch preload DC (50% ripple) 24 V | 10 N |
Max. preload 12 V DC (stabilised) | 10 N |
Max. preload 24 V DC (stabilised) | 10 N |
Max. latch preload AC | 50 N |
Max. keeper pre-load DC (50% residual ripple) | 10 N |
Max. latch preload DC (stabilised) | 10 N |